2022 Verified GB0-381-ENU dumps Q&As on your H3CSE-Routing & Switching Exam Questions Certain Success!
GB0-381-ENU Exam Dumps - 100% Marks In GB0-381-ENU Exam!
NEW QUESTION 195
In the topology shown in the figure, the following configurations are performed on RTA and RTB respectively:
RTA]ospf 1
RTA-ospf-1]area 1
RTA-ospf-1-area-0.0.0.1]network 1.1.1.1 0.0.0.0
RTA-ospf-1-area-0.0.0.1]network 10.0.0.0 0.0.0.255
RTA-ospf-1-area-0.0.0.1]network 192.168.1.0 0.0.0.255
RTA-ospf-1-area-0.0.0.1]network 192.168.4.0 0.0.0.255
RTA-ospf-1-area-0.0.0.1]network 192.168.7.0 0.0.0.255
RTA-ospf-1-area-0.0.0.1]network 192.168.8.0 0.0.0.255
RTA-ospf-1-area-0.0.0.1]network 192.168.15.0 0.0.0.255
RTB]ospf 1
RTB-ospf-1]area 1
RTB-ospf-1-area-0.0.0.1]network 10.0.0.0 0.0.0.255
RTB-ospf-1-area-0.0.0.1]area 0
RTB-ospf-1-area-0.0.0.1]abr-summar192.168.0.0 255.255.252.0
Then which of the following routes may exist in the RTC routing table_____
- A. 192.168.4.0/24
- B. 192.168.7.0/24
- C. 192.168.0.0/23
- D. 192.168.1.0/24
Answer: A,B
NEW QUESTION 196
As shown in the figure: RTA and RTB are IBGP neighbors, and RTB and RTC are EBGP neighbors.
If the community attribute is used on the router RTA so that the route 10.10.10.0/24 on RTA can only be advertised to RTB, but cannot be forwarded to RTC through RTB, then what community attribute value should be set for 10.10.10.0/24 on RTA ?
- A. no-advertise
- B. no-advertise-subconfed
- C. no-export-subconfed
- D. no-export
Answer: A,C,D
NEW QUESTION 197
In the process of generating the fast forwarding table, the quintuple refers to ________.
- A. Source IP address, destination IP address, source port number, destination port number, protocol number
- B. Physical interface, MAC address, IP address, port number, protocol number
- C. Physical interface, source IP address, destination IP address, source port number, destination port number
- D. Source MAC address, destination MAC address, protocol number, source IP address, destination IP address
Answer: A
NEW QUESTION 198
Two MSR routers MSR-1 and MSR-2 are interconnected through the 172.16.16.0/20 network segment. Now it is necessary to configure the OSPF protocol on the router MSR-1 to establish the adjacency relationship with MSR-2 normally. Which of the following configurations is not feasible? (Choose one or more) (Choose one or more)
- A. MSR-1] ospf MSR-1-ospf-1] area 0 MSR-1-ospf-1-area-0.0.0.0] network 172.16.16.0 0.0.15.255
- B. MSR-1] ospf MSR-1-ospf-1] area 0 MSR-1-ospf-1-area-0.0.0.0] network 172.16.16.0 0.0.31.255
- C. MSR-1] ospf MSR-1-ospf-1] area 0 MSR-1-ospf-1-area-0.0.0.0] network 172.16.16.0 0.0.32.255
- D. MSR-1] ospf MSR-1-ospf-1] area 0 MSR-1-ospf-1-area-0.0.0.0] network 172.16.16.0 0.0.255.255
Answer: C
NEW QUESTION 199
As shown in the figure, RTA and RTB are located in AS 100. The two establish IBGP neighbors. There is no route for RTA and RTC Internet segments on RTB: RTC is located in AS 200, and EBGP neighbors are established with RTA.
The main configuration is as follows:
RTA]
bgp 100
peerRTC as-number 200
peerRTB as-number 100
RTB]
bgp 100
peerRTA as-number 100
RTC]
bgp 200
peerRTA as-number 100
RTC cannot send the 192.168.1.0/24 route to RTA, but the 92.168.1.0/24 route does not appear in the IP 1 routing table of RTB.
To solve the above problems, what adjustments should be made in the configuration?
- A. RTA-bgp]peerRTC next-hop-local
- B. RTC-bgp]peerRTA next-hop-local
- C. RTA-bgp]peerRTB next-hop-local
- D. RTB-bgp]peerRTA next-hop-local
Answer: C
NEW QUESTION 200
Which of the following descriptions about Route-polic is correct is ______?
- A. A node of Route-polic must contain at least one if-match clause
- B. In the same node of Route-polic, the relationship between different if-match clauses is and
- C. In a Route-polic, the relationship between different nodes is OR
- D. If more than one node is defined in Route-polic, at least one of the nodes should have a matching mode of permit
Answer: B,C,D
NEW QUESTION 201
Integrated IS-IS supports the ________ protocol.
- A. OSI and IP
- B. IP
- C. ISO
- D. OSI
Answer: A
NEW QUESTION 202
Which of the following methods of routing filtering are feasible?
- A. For OSPF, 5 types of LSA can be filtered on ABR
- B. For OSPF, the routing information calculated by LSDB can be filtered
- C. By filtering routing information carried in routing protocol packets
- D. By filtering routing protocol packets
Answer: B,C,D
NEW QUESTION 203
In the topology shown in the figure, RTA needs to be configured to introduce default routes in the OSPF area.
Which of the following configurations cannot achieve the above purpose?
- A. RTA-ospf-1] area 0 RTA-ospf-1-area-0.0.0.0] network 192.168.1.0 0.0.0.255 RTA-ospf-1] default-route-advertise
- B. RTA-ospf-1] area 0 RTA-ospf-1-area-0.0.0.0] network 192.168.1.0 0.0.0.255 RTA-ospf-1] default-route-advertise RTA] ip route-static 10.0.0.0 0.0.0.0 192.168.0.2
- C. RTA-ospf-1] area 0 RTA-ospf-1-area-0.0.0.0] network 192.168.1.0 0.0.0.255 RTA-ospf-1] default-route-advertise RTA] ip route-static 0.0.0.0 0.0.0.0 192.168.0.2
- D. RTA-ospf-1] area 0 RTA-ospf-1-area-0.0.0.0] network 192.168.1.0 0.0.0.255 RTA-ospf-1] default-route-advertise alwa RTA] ip route-static 10.0.0.0 0.0.0.0 192.168.0.2
Answer: A,B
NEW QUESTION 204
As shown in the figure, RTA establishes eBGP neighbor relationships with RTB and RTC respectively, and both RTB and RTC advertise a route N to RTA.
As shown in the figure, if you want RTA to give priority to the routes advertised by RTB, and the routes advertised by RTC as a backup, you need _____.
- A. When RTB advertises routes to RTA, MED is set to 200: When RTC advertises routes to RTA, MED is set to 100
- B. When RTB advertises routes to RTA, MED is set to 100: When RTC advertises routes to RTA, MED is set to 200
- C. Set the local preference value of route N to 200 on RTB, and set the local preference value of route N to 100 on RTC
- D. Set the inbound routing policy for RTB on RTA, and set the local priority of the routes advertised by RTB to 200
Answer: B,D
NEW QUESTION 205
The contents of the OPEN message of the BGP protocol include ____________
- A. BGP protocol version number
- B. AS Number
- C. Router ID
- D. Hold timer value
Answer: A,B,C,D
NEW QUESTION 206
In IS-IS, it is _______ that has both Level-1 and Level-2 link status information.
- A. Level-2 IS
- B. Level-1-2 IS
- C. Level-1 IS
- D. ES
Answer: B
NEW QUESTION 207
In the network as shown in the figure, no dynamic routing protocol is enabled between all routers, and only static routes can be configured.
Then the correct configuration on RTE should be _________.
- A. ip route-static 10.0.0.0 255.255.252.0 S1/0
- B. ip route-static 10.0.0.0 255.255.254.0 S1/0
- C. ip route-static 10.0.0.0 255.255.254.0 S2/0
- D. ip route-static 10.0.0.0 255.255.252.0 S2/0
Answer: A
NEW QUESTION 208
Regarding the NSAP address, which of the following descriptions are correct?
- A. NSAP is equivalent to the IP address and protocol number in the IP network. The same NSAP of the two systems will cause communication abnormalities
- B. Stem ID is used to identify IS in the area. In integrated IS-IS, it is recommended to be converted from the system's Router ID or interface MAC address
- C. The area address and Stem ID are fixed length, NSEL is variable length
- D. NSAP address includes three parts: area address, Stem ID and NSEL
Answer: A,B,D
NEW QUESTION 209
Among the following types of LSA, the ones allowed in the backbone area are _________
- A. Tpe7 LSA
- B. Tpe4 LSA
- C. Tpe5 LSA
- D. Tpe3 LSA
Answer: B,C,D
NEW QUESTION 210
......
Pass Your GB0-381-ENU Exam Easily With 100% Exam Passing Guarantee: https://www.dumpsquestion.com/GB0-381-ENU-exam-dumps-collection.html