[2023] Verified NS0-176 Dumps Q&As - 1 Year Free & Quickly Updates
Latest 2023 Realistic Verified NS0-176 Dumps - 100% Free NS0-176 Exam Dumps
NetApp NS0-176 Exam Topics:
| Section | Objectives |
|---|---|
| FlexPod Configuration | - Describe how to install and configure the FlexPod components - Describe how to configure neworks in a UCS solution - Describe how to configure SAN boot in a FlexPod solution - Describe knowledge of how to configure a service profile - Demonstrate knowledge of how to configure storage in a FlexPod solution - Demonstrate knowledge of how to configure Cisco Nexus switches |
| Information Gathering for FlexPod Solutions | - Describe the main FlexPod components |
| FlexPod Design | - Describe the storage components supported in FlexPod - Describe the networking components supported in FlexPod - Describe the compute components supported in FlexPod |
| FlexPod Troubleshooting | - Demonstrate how to perform FlexPod troubleshooting |
NetApp NS0-176 Exam Certification Details:
| Exam Price | $150 USD |
| Sample Questions | NetApp NS0-176 Sample Questions |
| Passing Score | 68% |
| Exam Code | NS0-176 FlexPod |
| Exam Name | Cisco and NetApp FlexPod Implementation and Administration |
| Number of Questions | 60 |
NEW QUESTION 68
Which LIF role is used for SnapMirror traffic on a system running clustered Data ONTAP?
- A. interconnect
- B. node-management
- C. intercluster
- D. cluster-management
Answer: C
NEW QUESTION 69
When installing an instance of VMware ESXi on a UCS B-Series server, where should an ISO image be loaded?
- A. Only physical install disks are supported on UCS B-Series servers
- B. ISO images should not be used
- C. From the UCS Manager select KVM Console, Select the Virtual Media tab, and select Add Image
- D. The UCS vCenter Plugin must be used
Answer: C
NEW QUESTION 70
You are deploying a new virtual machine (VM). Your customer requires that the VM cannot reserve space on the VMFS filesystem, and the VM can only consume blocks when data is written to disk from and within the VM/Guest OS.
Which virtual disk should you create to meet these requirements?
- A. Thick Provision Eager Zeroed
- B. Thick Provision Lazy Zeroed
- C. Independent Nonpersistent
- D. Thin Provision
Answer: D
NEW QUESTION 71
A customer wants a newly deployed UCS C-Series server's fans to run at the minimum speed required to keep the server cool. The customer is also complaining that the server fans are making too much noise.
In this scenario, which type of fan speed should you select under the Power Control Policy of UCSM?
- A. Performance
- B. Low Power
- C. Max Power
- D. Balanced
Answer: D
NEW QUESTION 72
Which four items are required in order to create a Gold Master Boot LUN to automate the provisioning of Hyper-V hosts using the built-in LUN cloning capabilities of NetApp storage? (Choose four.)
- A. Create a new interface group on the NetApp Cluster
- B. Creation of a service profile and zoning for Gold Master Boot LUN
- C. SysPrep of the server operating system
- D. Creation of a LUN for the Gold Master Boot LUN
- E. Create additional virtual fibre channel (vfc) interfaces for the Nexus 5500
- F. Configuration of the Server OS and hotfix installation
Answer: B,C,D,F
NEW QUESTION 73
Which FlexPod management tool allows you to manage Storage Virtual Machines (SVMs) and replication relationships?
- A. OnCommand System Manager
- B. OnCommand Performance Manager
- C. OnCommand Balance
- D. OnCommand Insight
Answer: A
NEW QUESTION 74
A customer uses Cisco Intersight and now wants to monitor their NetApp storage system with Intersight.
In this scenario, which three actions must be completed to accomplish this task? (Choose three.)
- A. Get an Intersight Essentials tier license.
- B. Get an Intersight Advantage tier license.
- C. Activate the API Gateway in ONTAP System Manager.
- D. Deploy Active IQ Unified Manager.
- E. Activate the API Gateway in Active IQ Unified Manager.
Answer: B,D,E
NEW QUESTION 75
You want to run the FlexPod execution profile in NetApp Config Advisor.
Which three login credentials are required to perform this task? (Choose three.)
- A. NetApp cluster
- B. Nexus switches
- C. ESXi server
- D. NetApp support login
- E. UCS Manager
Answer: A,B,E
NEW QUESTION 76
You currently have a FlexPod Datacenter solution, and you are merging with another company. That company's environment currently has a mix of different Cisco servers. You want to add as many of those servers to your FlexPod solution as possible.
In this scenario, which two Cisco servers are supported in a FlexPod environment? (Choose two.)
- A. B200 M5
- B. HX240c Edge M5
- C. S3260 M5
- D. C480 ML M5
Answer: A,D
NEW QUESTION 77
Which three management tools would you use to configure the NetApp storage component in a FlexPod Datacenter solution? (Choose three.)
- A. NetApp OnCommand System Manager
- B. Cisco UCS Central
- C. NetApp Virtual Storage Console (VSC) for VMware Sphere
- D. NetApp OnCommand Perfromance Manager
- E. Cisco UCS Director
Answer: A,B,C
NEW QUESTION 78
There are 2 chassis tied to a pair of Fabric Interconnects.
First chassis, chassis-1, has 1 link between single IOM and Fabric Module. Second chassis, chassis-4, has 4 links between single IOM and Fabric Module. Chassis discovery policy is set for 2 links.
Which statement is true?
- A. Both chassis will be added to UCS Domain utilizing all links. No additional steps needed.
- B. Both chassis will be added to UCS Domain utilizing all links only after performing chassis acknowledgment.
- C. Chassis-1 will not be added to UCS Domain. Chassis-4 will be added to UCS domain with all 4 links operating and no additional steps needed.
- D. Chassis-1 will not be added to UCS Domain. Chassis-4 will be added to UCS domain with all 4 links operating after chassis acknowledgement.
Answer: D
NEW QUESTION 79
A customer wants to reuse existing networking equipment that was pulled from another data center for a new FlexPod Datacenter solution. They want to know if their switch models are supported.
In this scenario, which two switch models will accomplish this task? (Choose two.)
- A. Cisco Catalyst 6504
- B. Cisco Catalyst 9300-48P
- C. Cisco MDS 9250i
- D. Cisco Nexus 9396PX
Answer: C,D
NEW QUESTION 80
Which backup type stores Service Profile information as a small editable file?
- A. Full Backup
- B. System Configuration
- C. All Configurations
- D. Logical Configuration
Answer: D
NEW QUESTION 81
To install your VEM, what is the extension of the VEM file name you'll be looking for to complete this install?
- A. .vsm
- B. .zip
- C. .vem
- D. .vib
Answer: D
NEW QUESTION 82
An administrator just finished installing Windows Server 2012 (Core) with Hyper-V.
Now the administrator must deploy a new VM using PowerShell with the parameters shown below.
--Name: web server
--Memory: 10 GB
--Hard Drive: Existing Disk (d:\vhd\BaseImage.vhdx)
Which PowerShell command creates the VM based on the Information in the scenario?
- A. new- VM- Name web server- MemoryStartupBytes 10GB- VHDPath BaseImage.vhdx
- B. New-VM-Name "web server"- MemoryStartupbytes 10 GB - VHDPath d:\vhd\BaseImage.vhdx -NewVHDSireBytes 6000000
- C. New-VM-Name "web server" - MemoryStartupbytes 10 GB- VHDPath d:\vhd\BaseImage.vhdx
- D. New-VM-Name web server-MemoryStartupbytes 1 GB- VHDPath BaseImage.vhdx
Answer: C
NEW QUESTION 83
Which two statements about HA pairs in a NetApp cluster are true? (Choose two.)
- A. In the event of a storage failover, the surviving node always takes over the partner's data LIFs.
- B. HA pairs in the same chassis are not connected to each other through an HA interconnect.
- C. Non-disruptive aggregate relocation can be performed between HA pairs without a takeover and giveback.
- D. In the event of a storage failover, the surviving node provides read/write access to the partner's disks until the failed node becomes available again.
Answer: A,D
NEW QUESTION 84
You are installing two NetApp FAS8080 EX controllers.
Which two ports would you use for HA connectivity? (Choose two.)
- A. ib0a
- B. ib0b
- C. eof
- D. e0e
Answer: A,B
NEW QUESTION 85
Which aggregates should be disabled for data aggregates?
- A. Snapshot copies
- B. FCP
- C. iSCSI
- D. SnapMirror copies
Answer: A
NEW QUESTION 86
Which policy detail should be set if you want a server to be exempt from all power capping?
- A. The UCS Power Cap feature should not be utilized in a FlexPod environment.
- B. Create a Power Control Policy and set Power Capping to No Cap
- C. Create a Power Control Policy select cap and set the priority to 1
- D. Create a Power Group with the appropriate chassis and set the Group Budget Power Cap (W) to 0.
Answer: B
NEW QUESTION 87
With Clustered Data ONTAP, which three protocols are supported for host boot in a UCS stateless computing environment in the FlexPod configuration? (Choose three.)
- A. CIFS
- B. iFCP
- C. FC
- D. NFS
- E. iSCSI
- F. FCoE
- G. FCIP
Answer: C,E,F
NEW QUESTION 88
How do the Fabric Interconnect ports connecting to the 2232PP FEX have to be configured?
- A. In UCS Manager, the FI ports connecting to the FEX must be set as type 'Server'
- B. In UCS Manager, the FI ports connecting to the FEX must be set as type 'Uplink'
- C. In UCS Manager, the FI ports connecting to the FEX must be set as type 'Auto'
- D. In UCS Manager, the FI ports connecting to the FEX must be set as type 'FEX'
- E. In UCS Manager, the FI ports connecting to the FEX must be set as type 'Network'
Answer: A
NEW QUESTION 89
An administrator has a FlexPod solution using VMware vSphere 6.0. The ESXi hosts use iSCSI for storage connectivity, and all paths have been configured and connected between the NetApp cluster and the ESXi hosts.
Virtual Storage Console has been installed and ESXi host-recommended settings have been applied to all hosts. The active LUN path for one of the iSCSI datastores experiences a connectivity failure and the LUN switches to a new active path.
In this scenario, which event would trigger the ESXi host to switch the active LUN path again?
- A. The original LUN path comes back online.
- B. The host processes 1,000 I/O operations.
- C. The ESXi host scans for new VMFS datastores.
- D. The NetApp LIF is reverted to its home port.
Answer: D
NEW QUESTION 90
......
NS0-176 Dumps PDF and Test Engine Exam Questions: https://www.dumpsquestion.com/NS0-176-exam-dumps-collection.html