2024 Realistic NSE6_FSW-7.2 Dumps are Available for Instant Access
Download Exam NSE6_FSW-7.2 Practice Test Questions with 100% Verified Answers
Fortinet NSE6_FSW-7.2 certification exam is a vendor-specific exam that is recognized by Fortinet, a leading provider of cybersecurity solutions. Fortinet NSE 6 - FortiSwitch 7.2 certification is highly regarded by employers and can open up new career opportunities for IT professionals. NSE6_FSW-7.2 exam is designed to test the candidate's knowledge and skills in FortiSwitch management, including VLANs, STP, RSTP, MSTP, and link aggregation. Those who pass the exam will be recognized as experts in FortiSwitch management and will be able to enhance network security by configuring and managing FortiSwitches.
Fortinet NSE6_FSW-7.2 (Fortinet NSE 6 - FortiSwitch 7.2) exam is a valuable certification for network professionals seeking to demonstrate their expertise in configuring, managing, and troubleshooting FortiSwitch devices. NSE6_FSW-7.2 exam covers a wide range of topics and evaluates the ability of individuals to configure and manage FortiSwitches in various network environments. With a passing score of 70%, individuals can obtain certification and join the ranks of network security professionals with recognized expertise in Fortinet products.
NEW QUESTION # 19
An administrator needs to deploy managed FortiSwitch devices in a remote location where multiple VLANs must be utilized to segment devices. No Layer 3 switch or router is present. The the only WAN connectivity is the router provided by the ISP connected to the public internet.
Which two items will the administrator need to use? (Choose two.)
- A. FortiSwitch devices configured with NAT disabled.
- B. A FortiSwitch interface connected to the ISP router configured with fortilink-13-mode enabled.
- C. FortiSwitch and FortiGate devices configured with IPsec interfaces.
- D. FortiSwitch and FortiGate devices configured with VXLAN interfaces.
- E. FortiSwitch devices that have the required internal hardware for this configuration.
Answer: A,D
NEW QUESTION # 20
Refer to the exhibit.
Which two statements best describe what is displayed in the FortiLink debug output shown in the exhibit? (Choose two.)
- A. FortiSwitch is sending FortiLink heartbeats to FortiGate.
- B. FortiSwitch is discovered and authorized by FortiGate.
- C. FortiSwitch is ready to push its new hostname to FortiGate.
- D. FortiSwitch is in a waiting state to join the stack group on FortiGate.
Answer: A,B
NEW QUESTION # 21
What feature can network administrators use to segment network operations and the administration of managed FortiSwitch devices on FortiGate?
- A. FortiLink split interface
- B. Multi-chassis link aggregation trunk
- C. FortiGate multi-tenancy
- D. FortiGate clustering protocol
Answer: C
NEW QUESTION # 22
Exhibit.
You need to manage three FortiSwitch devices using a FortiGate device. Two of the FortiSwitch devices initiated a reboot after the authorization process. However, the FortiSwitch device with the configuration shown in the exhibit. did not reboot All three devices completed FortiLink manage-ment authorization successfully.
Why did the FortiSwitch device shown in the exhibit not reboot to complete the authorization pro-cess?
The management mode was set to use FortiLink mode.
- A. The system time is not in-sync and is using a non-default value
- B. The FortiSwitch device is scheduled to reboot as part the authorization process
- C. The management mode was set to use FortiLink mode.
- D. Switch auto-discovery is enabled.
Answer: C
NEW QUESTION # 23
Exhibit.
Two routes are not installed in the forwarding information base (FIB) as shown in the exnibit. Which two statements about these two route entries are true? (Choose two.)
- A. These two routes will be used as load-balancing routes.
- B. These two routes have a higher administrative distance value available to the destina-tion networks.
- C. These two routes are available in the hardware routing table.
- D. These two routes will become primary, if the best routes are removed.
Answer: B,D
NEW QUESTION # 24
Which two statements about VLAN assignments on FortiSwitch ports are true? (Choose two.)
- A. Configure a native VLAN on the FortiLink
- B. Assign untagged VLANs using FortiGate CLI
- C. Assign an IP address and subnet mask to FortiSwitch VLANs
- D. Only assign one native VLAN on a port
Answer: B,D
NEW QUESTION # 25
Refer to the diagnostic output:
Two entries in the exhibit show that the same MAC address has been used in two different VLANs. Which MAC address is shown in the above output?
- A. It is a MAC address of FortiLink interface on FortiGate.
- B. It is a MAC address of FortiGate in HA configuration.
- C. It is a MAC address of a switch that accepts multiple VLANs.
- D. It is a MAC address of an upstream FortiSwitch.
Answer: C
NEW QUESTION # 26
Refer to the exhibit.
The exhibit shows the current status of the ports on the managed FortiSwitch. Access-1.
Why would FortiGate display a serial number in the Native VLAN column associated with the port23 entry?
- A. Ports connected to adjacent FortiSwitch devices show their serial number as the native VLAN.
- B. port23 is a member of a trunk that uses the Access-1 FortiSwitch serial number as the name of the trunk.
- C. port23 is configured as the dedicated management interface.
- D. A standalone switch with the shown serial number is connected on port23.
Answer: D
NEW QUESTION # 27
Which feature should you enable to reduce the number or unwanted IGMP reports processed by the IGMP querier?
- A. Enable IGMP flood unknown multicast traffic on the global setting.
- B. Enable IGMP snooping proxy.
- C. Enable the IGMP flood setting on the static port for all multicast groups.
- D. Enable the IGMP flood reports setting on the mRouter port.
Answer: B
NEW QUESTION # 28
Which packet capture method allows FortiSwitch to capture traffic on trunks and management interfaces?
- A. Sniffer profile
- B. sFlow
- C. SPAN
- D. TCP dump
Answer: B
NEW QUESTION # 29
How are the 'by VLAN redirect MAC address quarantine' mode and the 'by redirect MAC address quarantine' mode on FortiGate similar?
- A. Both modes block intra-VLAN traffic by FortiGate automatically.
- B. Both modes add quarantined device MAC addresses to the blocked firewall address group.
- C. Both modes require firewall policies to block inter-VLAN traffic.
- D. Both modes move quarantined devices to the quarantine VLAN.
Answer: A
NEW QUESTION # 30
Which two statements about managing a FortiSwitch stack on FortiGate are true? (Choose two.)
- A. The switch controller feature must be enabled on FortiGate.
- B. FortiSwitch must be operating in standalone mode before authorization.
- C. Only a hardware-based FortiGate can manage a FortiSwitch stack.
- D. A FortiLink interface must be enabled on FortiGate.
Answer: A,D
NEW QUESTION # 31
Which statement about the configuration of VLANs on a managed FortiSwitch port is true?
- A. Allowed VLANS expand the collision domain to the port.
- B. FortiSwitch VLAN interfaces are created only when FortiSwitch is managed by Forti-Gate.
- C. The native VLAN is implicitly part of the allowed VLAN on the port.
- D. Untagged VLANs must be part of the allowed VLANs: ingress and egress.
Answer: C
NEW QUESTION # 32
Exhibit.
What conditions does a FortiSwitch need to have to successfully configure the options shown in the exhibit above? (Choose two.)
- A. The port full speed prior the split was 100G SFP+
- B. The split port can be assigned to native VLAN
- C. The CLI commands are enabling a splitpo rt into four 10Gbps interfaces.
- D. The FortiSwitch model is equipped with a maximum of 54 interfaces.
Answer: C,D
NEW QUESTION # 33
Which two statements about 802.1X authentication on FortiSwitch ports are true? (Choose two.)
- A. A local user database must be used to authenticate devices using the 802.1X authentica-tion protocol.
- B. A security policy is used to apply 802.1 authentication on a port.
- C. All devices connecting to FortiSwitch must support 802.1X authentication.
- D. All hosts behind an authenticated port are allowed access after a successful authentica-tion.
Answer: B,D
NEW QUESTION # 34
Refer to the exhibits.
Port1 and port2 are the only ports configured with the same native VLAN 10.
What are two reasons that can trigger port1 to shut down? (Choose two.)
- A. An endpoint sent a BPDU on port1 that it received from another interface.
- B. STP triggered a loop and applied loop guard protection on port1.
- C. port1 was shut down by loop guard protection.
- D. Loop guard frame sourced from port 1 was received on port 1.
Answer: A,B
NEW QUESTION # 35
To enhance service in emergency situations, to which LLDP-MED Type-Length-Values does Forti-Switch advertise to IP phones?
- A. Location
- B. Power management
- C. Inventory management
- D. Network policy
Answer: C
NEW QUESTION # 36
What is the role of a device that is simultaneously functioning as both the distribution and core in the hierarchy network model?
- A. POE with high density FortiSwitch
- B. HA backup FortiGate managing FortiSwitch
- C. FortiGate managing FortiSwitch
- D. FortiSwitch functioning as standalone
Answer: C
NEW QUESTION # 37
Exhibit.
Which configuration change will allow the managed FortiSwitch to accept SNMP requests from any source?
- A. Create a new local access profile for SNMP only.
- B. Enable SNMP on the internal interface of the switch.
- C. Add SNMP service on the management interface of the switch.
- D. Configure an SNMP host to send SNMP traps.
Answer: D
NEW QUESTION # 38
Refer to the exhibit.
What two conclusions can be made regarding DHCP snooping configuration? (Choose two.)
- A. Maximum value to accept clients DHCP request is configured as per DHCP server range.
- B. Global configuration for DHCP snooping is set to forward DHCP client requests on all ports in the VLAN.
- C. DHCP clients that are trusted by DHCP snooping configured is only one.
- D. FortiSwitch is configured to trust DHCP replies coming on FortiLink interface.
Answer: C,D
NEW QUESTION # 39
Exhibit.
port1 and port2 are the only ports configured with the same native VLAN 10.
What are two reasons that can trigger port1 to shut down? (Choose two.)
- A. An endpoint sent BPDU on port1 it received from another interface.
- B. Loop guard frame sourced from port 1 was received VLAN 10 ports.
- C. STP triggered a loop and applied loop guard protection on port1.
- D. Oport1 was shut down by loop guard protection.
Answer: B,D
NEW QUESTION # 40
Which interfaces on FortiSwitch send out FortiLink discovery frames by default in order to detect a FortiGate with an enabled FortiLink interface?
- A. The last four switch ports on FortiSwitch have auto-discovery enabled by default.
- B. All ports have auto-discovery enabled by default.
- C. The ports with auto-discovery enabled by default are dependent upon the FortiSwitch model.
- D. No ports are enabled by default for auto-discovery. This must be configured under config switch interface.
Answer: B
NEW QUESTION # 41
......
Positive Aspects of Valid Dumps NSE6_FSW-7.2 Exam Dumps! : https://www.dumpsquestion.com/NSE6_FSW-7.2-exam-dumps-collection.html
Share Latest NSE6_FSW-7.2Test Practice Test Questions, Exam Dumps: https://drive.google.com/open?id=1c8TeOHvkoXF9KiAtdXEB9K6nMXnFH7Or