[Dec 28, 2023] 1z1-078 PDF Dumps is essential on your 1z1-078 Exam Questions Certain Success! [Q13-Q34]

Share

[Dec 28, 2023] 1z1-078 PDF Dumps is essential on your 1z1-078 Exam Questions Certain Success!

1z1-078 PDF Questions - Perfect Prospect To Go With 1z1-078 Practice Exam

NEW QUESTION # 13
Which three statements are true about fully qualified file names in ASM? (Choose three.)

  • A. They can be created only if OMF is enabled.
  • B. They are system Generated at the time of ASM file creation.
  • C. An alias may be created for an existing file by referring to the fully qualified file name.
  • D. They are the only valid form that can be used for single file creation of a control file.
  • E. They can be used to reference existing ASM files.

Answer: B,E


NEW QUESTION # 14
Oracle Clusterware manages an administrator-managed database service defined with the MANUAL management policy.
Which two statements are true? (Choose two.)

  • A. The service must be manually restarted with SRVCTL every time the instance hosting the service fails.
  • B. When manually started, the service will always start on one or more available instances rather than on their preferred instances.
  • C. The service must be manually restarted with SRVCTL after restarting the Clusterware stack on the node hosting the service.
  • D. The service must be manually started with SRVCTL after a planned restart of the instance hosting the service.
  • E. Clusterware will monitor the service while it is active.

Answer: D,E


NEW QUESTION # 15
Which four statements are true concerning the upgrading of Oracle Grid Infrastructure 19c? (Choose four.)

  • A. Upgrade validation may be done using the Oracle Universal Installer which in turn invokes the built-in cluster verification utility.
  • B. The upgrade must be done out-of-place.
  • C. The oracle home environment variable must be set to the Grid Infrastructure home directory in the installation owner's environment.
  • D. The cluster verification utility cluvfy.sh can generate fixup scripts to run on all nodes of the cluster.
  • E. The upgrade must be done in-place.
  • F. The cluster verification utility cluvfy.sh can verify that the cluster is ready for an upgrade.
  • G. The oracle SID environment variable must be set to the SID of the ASM instance in the installation owner's environment.

Answer: A,C,D,F


NEW QUESTION # 16
Which two statements are true about node listeners in a Grid Infrastructure Cluster using ASM? (Choose two.)

  • A. They listen only for database instances on the same node.
  • B. They listen on behalf of any ASM instance and all database instances on the same node.
  • C. They run from the Grid Infrastructure home by default.
  • D. They listen only for the ASM instance on the same node.
  • E. There can be only one node listener per node.

Answer: B,C


NEW QUESTION # 17
Which two statements are true concerning Oracle 19c Clusterware-managed application VIPs? (Choose two.)

  • A. An application VIP is created on the default network by the appvipcfg utility.
  • B. If an application sends messages to be displayed and sets the display variable, then an application VIP is required.
  • C. Application VIPs do not fail over to surviving cluster nodes when the node hosting the VIP fails.
  • D. An application VIP can be created with the crsccl utility.
  • E. An application VIP is created on the interconnect network by the crsccl utility.

Answer: A,D


NEW QUESTION # 18
Which two steps must always be performed to delete node host04 from an Oracle 19c Clusterware cluster that does not use Grid Naming Service (GNS)? (Choose two.)

  • A. Run the crsctl delete node -n host04 command as root on host01, or on either host02 or host03.
  • B. Run the crsct1 unpin css - host04 command as root on host04.
  • C. Run the crsctl unpin css - host04 command as root on host01, or on either host02 or host03.
  • D. Run the rootcrs.pl -deconfig -force command as root on host01, or on either host02 or host03.
  • E. Run the crsctl delete node -n host04 command as root on host04.
  • F. Run the rootcrs.pl -deconfig -force command as root on host04.

Answer: A,F


NEW QUESTION # 19
Which two methods exist for enabling the collection of additional resource debugging information for specific resources controlled by Oracle 19c Clusterware? (Choose two.)

  • A. Use the cluvfy comp command for the specific resource within a component.
  • B. Use the crsct1 set trace res "resource_name=debugging_level" command.
  • C. Use the crsct1 set log res "resource_name=debugging_level2" command.
  • D. Set the environment variable _USR_ORA_DEBUG=1 and then stop and restart the resource that requires resource debugging data to be collected.

Answer: B,D


NEW QUESTION # 20
You administer a six-instance, policy-managed, multitenant RAC database CDB1 with three PDBs: PDB_1,PDB_2, and PDB_3.
Server pool prod_pool has a cardinality of three and all six hosts of the cluster are up.
Examine these commands executed on HOST01:

Which two statements are true regarding the AR service? (Choose two.)

  • A. AR runs as a singleton service in the server pool prod pool and the AR service is available in each of the CDBl instances.
  • B. AR is available on any one available CDBl instance in prod pool at any one time.
  • C. AR can fail over to any other available CDBl instance in prod pool.
  • D. AR can fail over to any one of the available CD31 instances.
  • E. AR is available only on the CDBl instance on host01.

Answer: B,C


NEW QUESTION # 21
You performed these steps to disable an ADVM volume containing an ACFS file system:
1. Dismount the file system.
2. Disable the volume with the ASMCMD voldisable command.
Which two statements are true regarding the actions performed? (Choose two.)

  • A. The ACFS file system will be permanently removed from the volume.
  • B. The ACFS file system will be permanently removed from the volume only if the file system is empty.
  • C. The volume can be enabled and the file system can be mounted back again to access the existing data.
  • D. The ACFS mount registry with Oracle restart is automatically deleted.
  • E. The disabling of volume does not destroy data in the file system.

Answer: C,E


NEW QUESTION # 22
Which three statements are true regarding ASM on a four-node cluster? (Choose three.)

  • A. An ASM instance and database instances can coexist on the same node.
  • B. A database instance on a node can only be a client of an ASM instance running on the same node.
  • C. ASM Cluster File System (ACFS) can be deployed on any nodes.
  • D. A database instance on a node cannot be a client of an ASM instance running on other nodes.
  • E. A database instance on a node uses an ASM instance as an I/O server when requesting I/O to diskgroups.
  • F. A database instance on a node can be a client of an ASM instance running on any node.

Answer: A,E,F


NEW QUESTION # 23
Which three statements are true about ASM Cloud File System (ACFS) replication? (Choose three.)

  • A. Replication is automatically terminated if the primary file system has less than 2 GB free space.
  • B. The privilege sysrepl has been introduced for ACFS replication.
  • C. ACFS auditing information is replicated from the primary file system to the standby file system.
  • D. Standby redo log files are required on the standby site for synchronous redo transport.
  • E. One site of an ACFS replication configuration can host both primary and standby file systems.

Answer: B,C,E


NEW QUESTION # 24
Which three statements are true about ASM Cloud File System (ACFS) encryption? (Choose three.)

  • A. A copy of an encrypted file is not encrypted unless it is created in an encrypted directory.
  • B. acfsutil encr off can be run by an encryption manager who may not have system administrator privileges.
  • C. acfsutil encr inic is used to establish role separation between encryption managers and encryption auditors.
  • D. An ACFS snapshot can be ACFS encrypted.
  • E. acfsucil encr on can be used to specify the encryption key length for a directory or file.

Answer: C,D,E


NEW QUESTION # 25
Which two benefits are obtained by using Affinity to reduce global resource contention? (Choose two.)

  • A. Oracle RAC affinity for partitioned tables routes database requests to Oracle RAC instances in such a way that each instance always gets requests for a disjoint subset of rows in the database, this affinity leads to higher Oracle RAC performance and scalability because of improved cache locality and reduced internode synchronization and block pings.
  • B. Oracle RAC affinity for partitioned tables routes all database requests for a partition tables to a single Oracle RAC instance leading to higher Oracle RAC performance and scalability because of improved cache locality and reduced internode synchronization and block pings of the partition tables.
  • C. To enhance the performance of distributed transactions with applications server that provides XA affinity, you can direct all branches of a distributed transaction to a single instance in the cluster to improve cache locality and reduce internode synchronization and block pings.
  • D. Oracle RAC affinity for partitioned tables routes database requests to all available Oracle RAC instances evenly to create a global affinity in such a way that each instance always gets an even number of requests leading to higher Oracle RAC performance by using a higher levels of available global cache to reduce global resource contention.
  • E. To enhance the performance of distributed transactions with applications server that provides XA affinity, you can automatically spawn new dedicated database RAC instances to isolate distributed transaction.

Answer: B,C


NEW QUESTION # 26
Which method should be used to convert a single-instance Oracle 19c Database to a RAC Database?

  • A. Using dbca to create a template from the single-instance database and then to create a RAC database on the cluster using that template
  • B. Using the rconfig utility to migrate the database to shared storage and then using dbca to start one or more RAC database instances on the cluster
  • C. Using the rconfig utility to create a template from the single-instance database and then using dbca to create a RAC database on the cluster using that template
  • D. Using dbca to migrate the database to shared storage and then to start one or more RAC database instances on the cluster

Answer: D


NEW QUESTION # 27
Which three statements are true about the services created when the DBCA is used to create a RAC database? (Choose three.)

  • A. Policy-managed services specified for a database allow the creation of a new server pool using dbca.
  • B. They can be administrator managed for a multitenant database.
  • C. They can be policy managed for a multitenant database.
  • D. Singleton services are not permitted for multitenant databases.
  • E. A server pool must be created with srvct1 before creating a policy-managed RAC database that uses that server pool for a service.

Answer: A,B,C


NEW QUESTION # 28
Examine this command executed on the first node of a four-node cluster:
$ < DATABASE_ORACLE_HOME >/OPatch/opatch apply 33575673
What does this command do?

  • A. It applies a patch to all oracle homes with the same release only on the first cluster node.
  • B. It applies a patch to all database oracle homes with the same release only on the first cluster node.
  • C. It applies a patch to all database oracle homes with the same release on all cluster nodes.
  • D. It applies a patch to one oracle home only on the first cluster node.
  • E. It applies a patch to one database ORACLE home on alll cluster nodes.

Answer: D


NEW QUESTION # 29
Which two statements are true concerning diagnostic components and requirements of Oracle 19c Clusterware? (Choose two.)

  • A. There is one ologgerd service for the cluster health monitor (CHM) on each cluster node regardless of cluster size.
  • B. The clusterware log files are stored inside the Grid Infrastructure Management Repository database used by the cluster health monitor
  • C. The diagcolleccion.pl script must be run from the Grid home directory as the arid infrastructure owner.
  • D. The oclumon utility may be used to get and set parameters for the cluster health monitor (CHM) repository.
  • E. There is one osysmond service for the cluster health monitor (CHM) on each cluster node regardless of cluster size.

Answer: C,D


NEW QUESTION # 30
Which three statements are true about the administration and use of policy sets in Oracle 19c Clusterware? (Choose three.)

  • A. Clusterware administrators cannot directly modify the policy set when Quality of Service (QoS) Management is used.
  • B. A server pool can have the same attributes defined for different policies in the policy set, when user-defined policy management is used.
  • C. A server pool can have different attributes defined for different policies in the policy set, when user-defined policy management is used.
  • D. All server pools in a cluster are controlled by the policy set, when user-defined policy management is used.
  • E. Servers in a server pool outside the control of the policy set are never affected by policy changes, when user-defined policy management is used.

Answer: B,C,D


NEW QUESTION # 31
Which three statements are true concerning activation of a user-defined policy in Oracle 19c Clusterware? (Choose three.)

  • A. When a policy is first created, it is initially inactive.
  • B. An administrator-defined policy may be activated using the srvctl utility.
  • C. When a policy is activated, resources can be automatically stopped to comply with the policy definition.
  • D. When a policy is first created, it is initially active.
  • E. When a policy is activated, resources cannot be automatically started to comply with the policy definition.
  • F. When a policy is activated, nodes may be reassigned to server pools based on the policy definition.

Answer: A,B,C


NEW QUESTION # 32
Which three statements are true about services and load balancing for Oracle 19c clients connecting to Oracle 19c RAC database instances? (Choose three.)

  • A. Services support the balancing of client connections across RAC database instances.
  • B. In server-side load balancing, node listener redirects the client to another node listener for connection to an instance.
  • C. Load balancing can be done by the client, the listener, or both, for any one connection request.
  • D. Load balancing can be done by the client or the listener, but not both, for any one connection request.
  • E. Client-side connect-time load balancing can balance connection requests across SCAN listeners.

Answer: A,B,C


NEW QUESTION # 33
You want to create a tablespace, SALES, with these requirements:
1. Its data file has an alias name sales.dbf.
2. Its data file is stored in the directory CURRENT_YR in the disk group DATA.
Examine this command:
SQL> CREATE TABLESPACE sales;
Which two tasks must you perform to meet these requirements? (Choose two.)

  • A. Add the autoextend on clause to the command.
  • B. lAdd the DATAFILE '/CURRENT YR/sales.dbf clause to the command.
  • C. Create the current yr directory in the +data disk group.
  • D. Create the current yr directory in the root directory (+).
  • E. Add the DATAFILE '+DATA/CURRENT YR/sales.dbf clause to the command.

Answer: C,E


NEW QUESTION # 34
......


Oracle 1z1-078 Exam Syllabus Topics:

TopicDetails
Topic 1
  • Explain how global resources are managed
  • Determine RAC-specific wait-events, global enqueues and system statistics
Topic 2
  • Configure server-side connect-time load balancing
  • Use DBCA to convert a single-instance database to a RAC One Node database
Topic 3
  • Explain use of Affinity to reduce Global Resource Contention
  • Define undo tablespaces in a RAC environment
Topic 4
  • Explain the types of patches and upgrades available
  • Explain the hivh availability components of Oracle Clusterware
Topic 5
  • Install the Oracle database software
  • Modify initialization parameters in a RAC environment
Topic 6
  • Describe the architecture and components of Flex ASM
  • Monitor ASM instances using the V$ASM dynamic performance views
Topic 7
  • Optional Install for the Grid Infrastructure Management Repository
  • Install a patchset with the Oracle Universal Installer (OUI) utility
Topic 8
  • Configure the RAC database to use ARCHIVELOG mode and the fast recovery area
  • Convert a single instance Oracle database to RAC
Topic 9
  • Explain global enqueue and instance lock management
  • Explain the benefits of Fast Application Notification (FAN)

 

1z1-078 Exam with Accurate Oracle Database 19c: RAC, ASM, and Grid Infrastructure Administration PDF Questions: https://www.dumpsquestion.com/1z1-078-exam-dumps-collection.html

True Oracle Exam Extraordinary Practice For the 1z1-078 Exam: https://drive.google.com/open?id=17Cp-BaeSRBnvoyGRC7Cc31gpcKZJ2UNL