Download Free SAP C-TPLM30-67 Real Exam Questions Download
Latest SAP C-TPLM30-67 Real Exam Dumps PDF
SAP C-TPLM30-67 Exam Description:
The "SAP Certified Application Associate - SAP Maintenance & Repair with ERP 6.0 EHP7" certification exam verifies that the candidate possesses basic knowledge in the area of SAP Plant Maintenance. This certificate proves that the candidate has the required understanding within this consultant profile of the ERP solution, and can implement this knowledge practically in projects under guidance of an experienced consultant. It is recommended as an entry-level qualification to allow consultants to get acquainted with the fundamentals of SAP Maintenance & Repair.
NEW QUESTION 22
What are the prerequisites for order settlement? (Choose three)
- A. The order must be technically completed.
- B. The order must be released.
- C. A settlement rule must be created for the order.
- D. The settlement profile used in the order type must allow settlement.
- E. The order has not been settled previously.
Answer: B,C,D
NEW QUESTION 23
What does the structure indicator for a functional location determine? (Choose three)
- A. The number of characters for each hierarchy level
- B. The functional location category
- C. The edit mask
- D. The functional location type
- E. The number of hierarchy levels for a particular structure
Answer: A,C,E
NEW QUESTION 24
Under which conditions you can change stock information in the serial number manually.
There are 2 correct answers to this question.
Response:
- A. All active
- B. No plant has been entered
- C. Sterilization operation
- D. No stock check is active
- E. BOM active
Answer: B,D
NEW QUESTION 25
What all are the steps sequenced for structuring of technical process?
There are 2 correct answers to this question.
Response:
- A. Structure
- B. Define
- C. Assign
- D. Execute
- E. Identify
Answer: A,E
NEW QUESTION 26
Identify the purpose for creating Bills of Material
There are 3 correct answers to this question.
Response:
- A. Costing bill of material
- B. Structuring
- C. Production bill of material
- D. Design bill of material
- E. Processing
Answer: A,C,D
NEW QUESTION 27
To display overhead costs in a maintenance order, you need to assign a costing sheet in Customizing.
To which parameter do you assign the costing sheet?
Please choose the correct answer.
Response:
- A. Valuation categories
- B. Valuation variant
- C. Version for cost estimates
- D. Costing type
Answer: B
NEW QUESTION 28
Based on documented best practices, which options may need to be modified on a server QLogic HBA?
- A. Enable Target Reset and Login Retry Count
- B. Port Down Retry Count and Enable LIP Reset
- C. Port Down Retry Count and Enable Target Reset
- D. LUNs Per Target and Port Down Retry Count
Answer: C
NEW QUESTION 29
What do you use to set up a refurbishment order for external refurbishment?
- A. An order type for external refurbishment and an assignment of a material with split valuation.
- B. An external operation that contains a control key for refurbishment.
- C. An external operation that contains a subcontracting indicator and a material item with a material provision indicator activated.
- D. An order type for external refurbishment and a material item with item category External
Refurbishment.
Answer: C
NEW QUESTION 30
A customer is concerned they are over utilizing their 7K drives. Where can information about the real time I/O usage of individual drives be viewed?
- A. Charting > Disks > [disk folder] IO Charts
- B. Hardware > Disks > [disk folder] > [disk number]
- C. Hardware > Disks > [disk folder]
- D. Charting > Disks > [disk folder] > [disk number]
Answer: B
NEW QUESTION 31
A maintenance work order has external processing. The planning plant and maintenance plant have different addresses. A purchase requisition is generated from a maintenance order.
With standard delivered SAP Customizing, which address is the default delivery address in the purchase requisition?
- A. Work center
- B. Maintenance plant
- C. Planning plant
- D. Storage location
Answer: C
NEW QUESTION 32
A file server using an SC7020 storage array was impacted by ransomware in the morning and a majority of the files need to be recovered. The backup from the previous night did not run. Is there anything that can be done on the SC7020 array to help recover these files?
- A. Yes, if there is a snapshot from before the ransomware on the volume(s) were impacted. A View volume can be created from this snapshot and the files recovered.
- B. Yes, if there is a snapshot from before the ransomware on the volume(s) were impacted. Volume(s) can be rolled back to this snapshot.
- C. Yes, if there is a snapshot from before the ransomware on the volume(s) were impacted. A Replay can be created from this snapshot and the files recovered.
- D. Nothing can be done on the SC7020 to assist with this recovery.
Answer: B
NEW QUESTION 33
Your customer uses the dynamic availability check for stock material.
Where does the system check material availability for an operation?
- A. Only in the plant where the material is flagged with the special stock indicator for maintenance stock
- B. Only in the plant where the material has been reserved
- C. In all plants where material inventory exists
- D. In all plants where the material is managed with serial numbers
Answer: B
NEW QUESTION 34
Which of the following are prerequisites for business completion? (Choose two)
- A. The order must have planned costs.
- B. The order must be fully settled.
- C. The order must have actual costs.
- D. The balance of the order must be zero.
Answer: B,D
NEW QUESTION 35
Your customer wants to subdivide the maintenance organization by production responsibility.
What do you use to designate the contact person for coordination between production and plant maintenance?
- A. Work center
- B. Plant section
- C. Controlling area
- D. Production cost center
Answer: B
NEW QUESTION 36
Why should Legacy Port Mode be selected rather than Virtual Port Mode on an SC Series storage array?
- A. Virtual Port Mode is difficult to set up
- B. Virtual Port Mode does not support ALUA
- C. Legacy Port Mode is easier to set up and more reliable
- D. Virtual Port Mode requires NPIV support
Answer: A
NEW QUESTION 37
......
SAP C-TPLM30-67 Certification Exam Topics:
| Topic Areas | Topic Details, Courses, Books |
|---|---|
| Planning Preventative Maintenance Business Processes 8% - 12% | Describe the business processes associated with Preventive Maintenance and define roles and authorizations. |
| Customizing Preventive Maintenance > 12% | Configure the necessary maintenance plan elements used in Prevenative Maintenance. |
| Customizing Organizational Units 8% - 12% | Configure the Organizational Units required for processing Maintenance & Repair transactions. |
| Customizing Analysis and Reporting < 8% | Configure and execute various reporting options for maintenance and preventative maintenance processing. |
| Customizing Maintenance Processing > 12% | Configure the settings required for Maintenance processing, including scheduling and planning. |
| Customizing Refurbishment < 8% | Configure the required master data and related elements for refurbishment processing.
|
| Customizing Technical Objects > 12% | Configure the Technical Objects used in Maintenance & Repair transactions. |
| Executing Maintenance Business Processes > 12% | Describe how SAP ERP supports the business processes for Maintenance and Repair.
|
| Managing Technical Objects < 8% | Maintain Equipment master data, BOMs, and Classification settings. |
PDF (New 2021) Actual SAP C-TPLM30-67 Exam Questions: https://www.dumpsquestion.com/C-TPLM30-67-exam-dumps-collection.html