Pass Cisco Implementing Cisco Service Provider Advanced Routing Solutions Exam in First Attempt Guaranteed Updated Dump from DumpsQuestion!
Pass 300-510 Exam with 104 Questions - Verified By DumpsQuestion
NEW QUESTION 37
Refer to the exhibit.
Routers R1 and R2 cannot form a neighbor relationship, but the network is otherwise configured correctly and operating normally. Which two statements describe the problem? (Choose two.)
- A. The two routers have the same network ID
- B. The two routers are in different subnets
- C. The two routers have password mismatch issues
- D. The two routers are in the same area
- E. The two routers are in different areas
Answer: B,E
NEW QUESTION 38
Refer to the exhibit.
A network engineer implemented this segment routing configuration. Which statement about the output is true?
- A. The default segment routing global block range is being used on this device.
- B. A nondefault segment routing global block range is being used on this device.
- C. This range conflicts with the segment routing local block range.
- D. The device must be reloaded for these ranges to be allocated and used.
Answer: B
Explanation:
Reference:
segment-routing-book/seg-routing-global-block.html
NEW QUESTION 39
Refer to the exhibit.
Router 1 is a core ABR in a Cisco Unified MPLS environment. All of the router 1 BGP peers are established, but traffic between customers is failing. Which BGP configuration must be added to the configuration?
- A. It must be configured for graceful restart
- B. It must be configured with send labels
- C. It must be configured with a route reflector
- D. It must be configured with PIC edge
Answer: B
NEW QUESTION 40
Refer to the exhibit.
Router 1 has established an SR-TE tunnel with router 2. Which statement describes this configuration?
- A. Router 1 is the head-end tunnel and has dynamically chosen a path to router 2.
- B. Router 1 and router 2 have a bidirectional tunnel set up with dynamic path selection.
- C. Router 2 is the head-end tunnel and has explicitly set a path to router 1.
- D. Router 1 has a list of labels used to explicitly lay out a path to router 2.
Answer: A
NEW QUESTION 41
Refer to the exhibit.
R1 is directly connected to R2 and R3. R1 is in BGP AS 123, R2 is in BGP AS 2, and R3 is in BGP AS 3. Assume that there is no connectivity issue between R1, R2 and R1, R3. Which result between BGP peers R1, R2 and R1, R3 is true?
- A. The BGP session comes up between R1 and R2, but not between R1 and R3.
- B. The BGP session comes up between R1 and R3, but not between R1 and R2.
- C. The BGP session comes up between R1 and R2 and between R1 and R3.
- D. The BGP session does not come up between R1 and R2 and between R1 and R3.
Answer: C
NEW QUESTION 42
Refer to the exhibit.
Which attribute can router 1 alter so that only other iBGP peers prefer to use 192.168.4.2 as the next hop for route 192.168.3.0/24?
- A. origin
- B. MED
- C. weight
- D. local preference
Answer: B
NEW QUESTION 43
Refer to the exhibit.
Which tree does multicast traffic follow?
- A. shared tree
- B. source tree
- C. MDT default
- D. MDT voice
Answer: C
NEW QUESTION 44
Refer to the exhibit.
XR1 and XR2 are sending the prefix 10.11.11.0/24 to XR3. A configured policy on XR1 is incorrectly prepending AS path 11 11 12 12 onto this prefix. A network operator wants to add a policy onto XR3 that will not allow the falsely prepending prefix from being installed. Which policy configuration applied to the XR3 neighbor configuration for XR1 can accomplish this requirement without impact to other or future received routes?
- A. Option A
- B. Option D
- C. Option B
- D. Option C
Answer: B
Explanation:
Reference:
b_routing_cr41crs/b_routing_cr41crs_chapter_01000.html#wp3850885229
NEW QUESTION 45 
Refer to the exhibit. CE1 and CE2 cannot communicate through the service provider BGP peering is established between PE1 and PE2. IS-IS is the only routing protocol running in the service provider core. What step can be done to troubleshoot the issue?
- A. Switch the IGPs running in the core from IS-IS to OSPF to support a Cisco MPLS TE tunnel from PE1 to PE2.
- B. Verify the MPLS LSPs.
- C. Configure BGP between CE and PE routers.
- D. Confirm that IS-IS is running with metric-style narrow.
Answer: D
NEW QUESTION 46
Refer to the exhibit.
A network engineer implemented this segment routing configuration. Which statement about the output is true?
- A. The default segment routing global block range is being used on this device.
- B. A nondefault segment routing global block range is being used on this device.
- C. This range conflicts with the segment routing local block range.
- D. The device must be reloaded for these ranges to be allocated and used.
Answer: B
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/routers/asr920/configuration/guide/segment-routing/ segment-routing-book/seg-routing-global-block.html
NEW QUESTION 47
Refer to the exhibit.
Which effect of this configuration is true?
- A. It sets the hold timer to 30 milliseconds and the keepalive timer to 240 milliseconds
- B. It sets the hold timer to 30 seconds and the keepalive timer to 240 seconds
- C. It sets the keepalive timer to 30 seconds and the hold timer to 240 seconds.
- D. It sets the keepalive timer to 30 milliseconds and the hold timer to 240 milliseconds
Answer: C
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/iproute_bgp/command/irg-cr-book/bgps1.
html#wp1552800140
NEW QUESTION 48
Refer to the exhibit
Which router does R1 install as an alternate next hop when trying to reach R3 if LFA is enabled?
- A. R3
- B. R2
- C. R4
- D. R5
Answer: B
NEW QUESTION 49
Which two routing protocols have extensions capable of running SRv6? (Choose two.)
- A. IGRP
- B. OSPF
- C. EIGRP
- D. BGP
- E. RIP
Answer: B,D
NEW QUESTION 50
Which statement about BFD on Cisco IOS XR Software is true?
- A. Cisco IOS XR router must use dynamic routing or a static route back to the Cisco IOS router to establish the peer relationship.
- B. Cisco IOS XR router must use LDP to route back to the Cisco IOS router to establish the peer relationship.
- C. Cisco IOS XR Software does not support BFD multihop for IPv4.
- D. BFD is not compatible between Cisco IOS XR and Cisco IOS Software.
Answer: A
NEW QUESTION 51
Refer to the exhibit.
Which tree does multicast traffic follow?
- A. shared tree
- B. source tree
- C. MDT default
- D. MDT voice
Answer: C
NEW QUESTION 52
Refer to the exhibit.
Which effect of this configuration is true?
- A. It sets the hold timer to 30 milliseconds and the keepalive timer to 240 milliseconds
- B. It sets the hold timer to 30 seconds and the keepalive timer to 240 seconds
- C. It sets the keepalive timer to 30 seconds and the hold timer to 240 seconds.
- D. It sets the keepalive timer to 30 milliseconds and the hold timer to 240 milliseconds
Answer: C
NEW QUESTION 53
......
Penetration testers simulate 300-510 exam: https://www.dumpsquestion.com/300-510-exam-dumps-collection.html
Free Test Engine For Implementing Cisco Service Provider Advanced Routing Solutions Certification Exams: https://drive.google.com/open?id=1skwsorcy_0sQxHVDFSNsWb10a5hCMyMz