2022 Realistic 2V0-41.20 Dumps Latest VMware Practice Tests Dumps
2V0-41.20 Dumps PDF - 2V0-41.20 Real Exam Questions Answers
Introduction to Professional VMware NSX-T Data Center 2V0-41.20 Exam
This is a 70-item test with a passing score of 300 using a scaled system is the Professional VMware NSX-T Data Center 2V0-41.20 Exam that leads to VMware Certified Professional-Network Virtualization 2020 certification. An appointment time of 105 minutes is given to candidates, which includes five-minute seating time and ample time for non-native English speakers to complete the test. The total length of the exam is 100 minutes.
This is a proctored exam distributed worldwide at Pearson VUE testing centres. Visit the Pearson VUE Web site for more information.
NEW QUESTION 41
A customer has a network where BGP has been enabled and the BGP neighbor is configured on the Tier-0 Gateway. A NSX-T Data Center administrator used the get logical-routers command to retrieve this information:
Which two commands must be executed to check BGP neighbor status? (Choose two.)
- A. vrf 4
- B. sa-nsxedge-01(tier0_sr)> get bgp neighbor
- C. vrf 1
- D. vrf 3
- E. sa-nsxedge-01(tier1_sr)> get bgp neighbor
- F. sa-nsxedge-01(tier0_dr)> get bgp neighbor
Answer: B,D
NEW QUESTION 42
An NSX administrator is creating a NAT rule on a Tier-0 Gateway configured in active-standby high availability mode.
Which two NAT rule types are supported for this configuration? (Choose two.)
- A. Reflexive NAT
- B. 1:1 NAT
- C. Destination NAT
- D. Source NAT
- E. Port NAT
Answer: C,D
NEW QUESTION 43
Which statement is true about an alarm in a Suppressed state?
- A. An alarm can be suppressed for a specific duration in days.
- B. An alarm can be suppressed for a specific duration in seconds.
- C. An alarm can be suppressed for a specific duration in hours.
- D. An alarm can be suppressed for a specific duration in minutes.
Answer: C
Explanation:
Reference:
https://docs.vmware.com/en/VMware-NSX-Intelligence/1.1/user-guide/GUID-EBD3C5A8-F9AB-4A22-BA40-92D61850C1E6.html
"If you move an alarm into a Suppressed state, you are prompted to specify the duration in hours. After the specified duration passes, the alarm state reverts to Open. However, if the system determines the condition has been corrected, the alarm state changes to Resolved." https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/administration/GUID-EB1BB1D3-8892-4890-BE74-EF43CFC75F19.html
NEW QUESTION 44
Which TraceFlow traffic type should an NSX administrator use for validating connectivity between App and DB virtual machines that reside on different segments?
- A. Unicast
- B. Multicast
- C. Anycast
- D. Broadcast
Answer: A
NEW QUESTION 45
Which three protocols could an NSX administrator use to transfer log messages to a remote log server? (Choose three.)
- A. SSH
- B. TCP
- C. UDP
- D. HTTPS
- E. SSL
- F. TLS
Answer: B,C,F
Explanation:
Reference:
https://www.vmware.com/content/dam/digitalmarketing/vmware/en/pdf/certification/vmware-2vo-41.20-exam-prep-guide.pdf
NEW QUESTION 46
What are two valid options when configuring the scope of a distributed firewall rule? (Choose two.)
- A. DFW
- B. Group
- C. Segment Port
- D. Segment
- E. Tier-1 Gateway
Answer: A,B
NEW QUESTION 47
Which two ports are used by a transport node to communicate with the management and control planes in NSX-T Data Center 3.0? (Choose two.)
- A. 0
- B. 1234
The NSX Manager management plane communicates with the transport nodes by using APH Server over NSX-RPC/TCP through port 1234. CCP communicates with the transport nodes by using APH Server over NSX-RPC/TCP through port 1235. Taken from NSX-T ICM 3.0 Lecture manual - C. 1
- D. 2
- E. 3
Answer: B,C
NEW QUESTION 48
Which CLI command is used to disable SSH timeout on NSX Manger and NSX Edge nodes?
- A. nsxcli ssh session on
- B. set cli ssh timeout 0
- C. set cli-timeout 0
- D. set esxcli ssh session off
Answer: C
NEW QUESTION 49
Which two commands does an NSX administrator use to check the IP address of the VMkernel port for the GENEVE protocol on the ESXi transport node? (Choose two.)
- A. esxcfg-nics -1
- B. esxcfg-vmknic -1
- C. esxcli network nic list
- D. esxcli network ip interface ipv4 get
- E. net-dvs
Answer: B,D
NEW QUESTION 50
Which two statements describe the characteristics of an Edge Cluster in NSX-T 3.0 Data Center? (Choose two.)
- A. must contain only one type of edge nodes (VM or bare metal)
- B. can contain multiple types of edge nodes (VM or bare metal)
- C. must have only active-active edge nodes
- D. can have a maximum of 8 edge nodes
- E. can have a maximum of 10 edge nodes
Answer: B,E
Explanation:
Explanation
NEW QUESTION 51
Which tool could be used to configure BGP on a Tier-0 Gateway?
- A. ESX CLI
- B. API
- C. NSX CLI
- D. PowerShell
Answer: C
NEW QUESTION 52
Which two choices are prerequisites to configure NSX-T on VDS? (Choose two.)
- A. MTU 1400
- B. vSphere Distributed Switch 7.0
- C. vSphere Distributed Switch 6.5
- D. MTU 1600
- E. MTU 1500
Answer: B,D
Explanation:
Reference:
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/installation/GUID-BA34FB2A-6780-41C5-B895-F37E5A7B7BAE.html
NEW QUESTION 53
Which two commands are used to query the arp-table of a logical switch? (Choose two.)
- A. get logical-switch arp-table
- B. get logical-switch arp-table <logical-switch-uuid>
- C. get logical-switch <vni> arp-table
- D. get logical-switch arp-table <vni>
- E. get logical-switch <logical-switch-uuid> arp-table
Answer: C,E
NEW QUESTION 54
Which two statements are true about the implementation of multicast in NSX-T Data Center? (Choose two.)
- A. Multicast routing is implemented with PIM Sparse-Mode.
- B. IGMP Snooping is used to populate multicast forwarding tables.
- C. An Edge can be the Rendezvous Point.
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/nsxt_30_admin.pdf - D. Multicast is supported in ESXi and KVM transport nodes.
- E. Tier-0 gateways can be the Rendezvous Point.
Answer: A,B
NEW QUESTION 55
An NSX administrator would like to export syslog events that capture messages related to NSX host preparation events.
Which message ID (msgid) should be used in the syslog export configuration command as a filter?
- A. MONITORING
- B. GROUPING
- C. FABRIC
- D. SYSTEM
Answer: C
NEW QUESTION 56
When running nsxcli on an ESXi host, which command will show the Replication mode?
- A. get logical-switch <Local-Switch-UUID> status
- B. get logical-switch <Logical-Switch-UUID>
- C. get logical-switches
- D. get logical-switch status
Answer: B
Explanation:
Reference:
https://vdc-download.vmware.com/vmwb-repository/dcr-public/cc42e3c1-eb34-4567-a916-147e79798957/8264605c-a5e1-49a8-b603-cc78621eeeab/cli.html#get%20logical-switch%20%3Clogical-switch-id%3E%202
NEW QUESTION 57
Which CLI command should be executed on a KVM hypervisor to retrieve the VM interface UUID?
- A. virsh get-interface <VM Name>
- B. virsh show <VM Name> | grep interfaceid
- C. virsh dumpxml <VM Name> | grep interfaceid
- D. virsh list-interface <VM Name>
Answer: C
Explanation:
Reference:
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/nsxt_30_admin.pdf
NEW QUESTION 58
Which two BGP configuration parameters can be configured in the VRF Lite gateways? (Choose two.)
- A. Graceful Restart
- B. BGP Neighbors
- C. Route Aggregation
- D. Local AS
The following parameters are inherited from the default Tier-0 gateway and cannot be modified at the VRF level:
* Local AS
* Graceful restart
* Graceful restart timer
* Graceful restart stale timer
* Multipath relax
Inter-SR iBGP is not supported in VRF gateways.
BGP can be enabled or disabled per VRF gateway.
Route aggregation and BGP neighbors are local configurations per VRF. - E. Route Distribution
Answer: B,C
NEW QUESTION 59
......
The benefit of obtaining the Professional VMware NSX-T Data Center 2V0-41.20 Exam Certification
- VMware certifications improve job productivity
- VMware certifications improve earning
- VMware certified professionals are able to manage complex projects and issues
- If the applicant has the desire to transfer into a company to a higher-paying role. As always, this credential will help.
- VMware certified professionals are able to provide higher level of customer satisfaction
- VMware certifications improve career prospects
- VMware certifications echance credibility of certified professionals
- When an company recruits or promotes an employee, human resources are responsible for the decision. Now, although applicants may have an IT history, they make their decisions in a way that records several different variables. One thing is that applicants, like the VMware Certified Advanced Professional, have formal qualifications.
Who should take the Professional VMware NSX-T Data Center 2V0-41.20 Exam
Installing, configuring, handling, and troubleshooting NSX-T Data Center 3.0 solutions should be 6 months or more of experience for the minimally eligible applicant. Candidates who are well aware of NSX-T characteristics, functions, and architectures should take this exam. People with at least 6 months of Linux and KVM hands-on experience are highly encouraged to apply for this certification as this will give them an edge. In IT and with VMware vSphere and its command line, they should have 1 year of experience operating. Additional industry-recognized IT certifications or accreditation would likely be held by the successful applicant. All the information found in the exam sections mentioned below should be in the MQC.
2V0-41.20 Premium Exam Engine pdf Download: https://www.dumpsquestion.com/2V0-41.20-exam-dumps-collection.html
2V0-41.20 Exam [2022] Dumps VMware PDF Questions: https://drive.google.com/open?id=1QsgzrEq2mJVKFJNaJoEttOuD1S6qFqHa