Guaranteed Success in VCP-NV 2V0-41.20 Exam Dumps [Q37-Q60]

Share

Guaranteed Success in VCP-NV 2V0-41.20 Exam Dumps

VMware 2V0-41.20 Daily Practice Exam New 2024 Updated 95 Questions


Achieving the Professional VMware NSX-T Data Center certification demonstrates that an IT professional has the skills and knowledge required to design, deploy, and manage VMware NSX-T Data Center solutions. Professional VMware NSX-T Data Center certification validates an individual's expertise in network virtualization and security, which are essential skills for modern IT professionals.

 

NEW QUESTION # 37
A user is assigned these two roles in NSX Manager:
LB Admin
Network Engineer
What privileges does this user have in the system?

  • A. full access permissions on all networking services and full access permissions on load balancing features
  • B. read permissions on all networking services and read permissions on load balancing features
  • C. full access permissions on all networking services and read permissions on load balancing features
  • D. read permissions on all networking services and full access permissions on load balancing features

Answer: A


NEW QUESTION # 38
How is the intra-tier transit link connection created between SR and DR for a Tier-0 Gateway?

  • A. Manually create a gateway interface and mark it as transit.
  • B. Manually create external uplink interface and mark it as transit.
  • C. Automatically created when SR is initialized.
  • D. Automatically created when DR is created.

Answer: C

Explanation:
Reference: https://blogs.vmware.com/networkvirtualization/2018/01/nsx-t-routing-part-2.html/


NEW QUESTION # 39
Which three can an administrator define in a transport node profile? (Choose three.)

  • A. Segment Profile
  • B. Logical Router
  • C. Segment
  • D. N-VDS switch configuration
  • E. VDS switch configuration
  • F. Uplink Profile

Answer: D,E,F


NEW QUESTION # 40
What are three characteristics of a transport zone? (Choose three.)

  • A. configured with a Single N-VDS
  • B. optional for creating a segment
  • C. defines the scope and reachability of a Segment
  • D. defines the potential reach of transport nodes
  • E. configured with multiple N-VDS

Answer: A,C,D

Explanation:
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/2.3/com.vmware.nsxt.install.doc/GUID-F47989B2-2B9D-4214-B3BA-5DDF66A1B0E6.html


NEW QUESTION # 41
An NSX administrator would like to export syslog events that capture messages related to NSX host preparation events.
Which message ID (msgid) should be used in the syslog export configuration command as a filter?

  • A. GROUPING
  • B. MONITORING
  • C. SYSTEM
  • D. FABRIC

Answer: D

Explanation:
Reference:
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/nsxt_30_admin.pdf


NEW QUESTION # 42
Which discovery protocol is supported for hypervisor transport nodes?

  • A. Adobe Real-time CDP
  • B. Neighbor Discovery Protocol
  • C. Cisco Discovery Protocol
  • D. Link Layer Discovery Protocol

Answer: D


NEW QUESTION # 43
Which CLI command shows syslog on NSX Manager?

  • A. get log-file auth.log
  • B. get log-file syslog
  • C. show log manager follow
  • D. /var/log/sysloq/syslog.log

Answer: B

Explanation:
Explanation
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/administration/GUID-406AF9C3-E8F7-447A-8E


NEW QUESTION # 44
Which two choices are solutions of the NSX portfolio (Choose two.)?

  • A. NSX Service Mesh
  • B. Tanzu Kubernetes Grid
  • C. vRealize Automation
  • D. vRealize Network Insight
  • E. NSX Distributed IDS/IPS

Answer: A,E


NEW QUESTION # 45
Which three different transport nodes could be configured in the data plane? (Choose three.)

  • A. VM or Bare Metal NSX Edge
  • B. vShield Edge VM
  • C. ESXi and KVM
  • D. ESXi and Hyper-V
  • E. Bare Metal server
  • F. NSX Edge VM on KVM

Answer: A,C,E


NEW QUESTION # 46
Which statement is true about an alarm in a Suppressed state?

  • A. An alarm can be suppressed for a specific duration in hours.
  • B. An alarm can be suppressed for a specific duration in seconds.
  • C. An alarm can be suppressed for a specific duration in minutes.
  • D. An alarm can be suppressed for a specific duration in days.

Answer: A

Explanation:
https://docs.vmware.com/en/VMware-NSX-Intelligence/1.1/user-guide/GUID-EBD3C5A8-F9AB-4A22-BA40-92D61850C1E6.html
"If you move an alarm into a Suppressed state, you are prompted to specify the duration in hours. After the specified duration passes, the alarm state reverts to Open. However, if the system determines the condition has been corrected, the alarm state changes to Resolved." https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/administration/GUID-EB1BB1D3-8892-4890-BE74-EF43CFC75F19.html


NEW QUESTION # 47
Which two commands are used to query the arp-table of a logical switch? (Choose two.)

  • A. get logical-switch arp-table
  • B. get logical-switch arp-table <logical-switch-uuid>
  • C. get logical-switch <logical-switch-uuid> arp-table
  • D. get logical-switch arp-table <vni>
  • E. get logical-switch <vni> arp-table

Answer: C,E


NEW QUESTION # 48
A customer is preparing to deploy VMware Kubernetes on an NSX-T Data Center.
What is the minimum MTU size for the UPLINK profile?

  • A. 0
  • B. 1
  • C. 2
  • D. 3

Answer: B


NEW QUESTION # 49
Which two statements are true about the implementation of multicast in NSX-T Data Center? (Choose two.)

  • A. An Edge can be the Rendezvous Point.
  • B. Tier-0 gateways can be the Rendezvous Point.
  • C. IGMP Snooping is used to populate multicast forwarding tables.
  • D. Multicast is supported in ESXi and KVM transport nodes.
  • E. Multicast routing is implemented with PIM Sparse-Mode.

Answer: C,E

Explanation:
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/nsxt_30_admin.pdf


NEW QUESTION # 50
Which three services are compatible with VRF Lite? (Choose three.)

  • A. Load Balancer
  • B. NAT
  • C. VPN
  • D. DHCP
    VRF Lite is not compatible with the following services:
    -VPN
    -Load Balancer
    Taken from NSX-T ICM 3.0 Lecture Manual.
  • E. Intrusion Detection

Answer: B,D,E


NEW QUESTION # 51
Which CLI command does an NSX administrator run on the NSX Manager to generate support bundle logs if the NSX UI is inaccessible?

  • A. vm-support
  • B. get support-bundle file vcpnv.tgz
  • C. esxcli system syslog config logger set --id=nsxmanager
  • D. set support-bundle file vcpnv.tgz

Answer: B

Explanation:
https://vdc-download.vmware.com/vmwb-repository/dcr-public/cc42e3c1-eb34-4567-a916-147e79798957/8264605c-a5e1-49a8-b603-cc78621eeeab/cli.html


NEW QUESTION # 52
Which two BGP configuration parameters can be configured in the VRF Lite gateways? (Choose two.)

  • A. Local AS
  • B. BGP Neighbors
  • C. Graceful Restart
  • D. Route Distribution
  • E. Route Aggregation

Answer: B,E

Explanation:
The following parameters are inherited from the default Tier-0 gateway and cannot be modified at the VRF level:
* Local AS
* Graceful restart
* Graceful restart timer
* Graceful restart stale timer
* Multipath relax
Inter-SR iBGP is not supported in VRF gateways.
BGP can be enabled or disabled per VRF gateway.
Route aggregation and BGP neighbors are local configurations per VRF.


NEW QUESTION # 53
An NSX administrator is troubleshooting a connectivity issue with virtual machines running on an ESXi transport node.
Which feature in the NSX UI shows the mapping between the virtual NIC and the host's physical adapter?

  • A. Switch Visualization
  • B. Activity Monitoring
  • C. IPFIX
  • D. Port Mirroring

Answer: A


NEW QUESTION # 54
Which CLI command should be executed on a KVM hypervisor to retrieve the VM interface UUID?

  • A. virsh show <VM Name> | grep interfaceid
  • B. virsh list-interface <VM Name>
  • C. virsh dumpxml <VM Name> | grep interfaceid
  • D. virsh get-interface <VM Name>

Answer: C

Explanation:
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/nsxt_30_admin.pdf


NEW QUESTION # 55
An NSX administrator wants to create a Tier-0 Gateway to support equal cost multi-path (ECMP) routing.
Which failover detection protocol must be used to meet this requirement?

  • A. Beacon Probing (BP)
  • B. Bidirectional Forwarding Detection (BFD)
  • C. Virtual Router Redundancy Protocol (VRRP)
  • D. Host Standby Router Protocol (HSRP)

Answer: B


NEW QUESTION # 56
An NSX administrator noticed that the nsxcli command times out after 600 secs of idle time.
Which CLI command disables the nsxcli time out value on NSX Manager?

  • A. set cli-timeout 1
  • B. set cli-timeout disabled
  • C. set cli-timeout 0
  • D. set cli-timeout enabled

Answer: C

Explanation:
Explanation
"
https://vdc-download.vmware.com/vmwb-repository/dcr-public/cc42e3c1-eb34-4567-a916-147e79798957/82646
https://www.virten.net/2020/06/quick-tip-remove-nsx-t-ssh-and-http-session-timeout/


NEW QUESTION # 57
What are the advantages of using a Tier-0 Gateway in ECMP mode? (Choose two.)

  • A. increased north/south bandwidth
  • B. traffic predictability
  • C. stateful services leveraged
  • D. Failover of services
  • E. traffic load balancing

Answer: A,E


NEW QUESTION # 58
When deploying east-west network introspection, which Service Virtual Machine (SVM) deployment method achieves the least amount of traffic hairpinning?

  • A. Add partner SVMs to an edge cluster.
  • B. Place a partner SVM on each compute cluster node.
  • C. Create a secondary vNIC on each quest VM for SVM communication.
  • D. Centralize partner SVMs in a service cluster.

Answer: B

Explanation:
Explanation
"For SVMs deployed on compute hosts, an SVM does not need to be installed on every host. Some customers prefer to deploy the partner SVM on each host to achieve the least amount of traffic hairpinning. When the partner SVM is deployed in a service cluster, traffic is sent from the compute hosts across the overlay to the hosts in the service cluster."


NEW QUESTION # 59
An NSX administrator would like to configure syslog for a KVM transport node. Which host log files could be exported to a remote syslog server?

  • A. /var/log/cfgAgent.log
  • B. /var/log/cloudnet/nsx-ccp.log
  • C. /var/log/vmware/nsx-syslog
  • D. /var/log/nsx-audit.log

Answer: C


NEW QUESTION # 60
......


VMware 2V0-41.20 exam consists of 70 multiple-choice questions and has a time limit of 120 minutes. 2V0-41.20 exam covers a variety of topics, including NSX-T architecture, installation and configuration, security and firewalling, network services, and troubleshooting. Candidates must score at least 300 out of 500 points to pass the exam.

 

Test Engine to Practice 2V0-41.20 Test Questions: https://www.dumpsquestion.com/2V0-41.20-exam-dumps-collection.html

Use Valid 2V0-41.20 Exam - Actual Exam Question & Answer: https://drive.google.com/open?id=1QsgzrEq2mJVKFJNaJoEttOuD1S6qFqHa