(2024) PASS 301a exam with F5 301a Real Exam Questions [Q77-Q101]

Share

(2024) PASS 301a exam with F5 301a Real Exam Questions

Real exam questions are provided for LTM Specialist tests, which can make sure you 100% pass


Introduction to F5 301a: BIG-IP LTM Specialist: Architect Set-Up & Deploy Exam

The eligible applicant is capable of using TMOS-based systems that have already been developed on a daily basis. They may also perform simple troubleshooting on a TMOS-based system in order to provide senior engineers and/or F5 Support with full, correct, and relevant details.

They are capable of completing all of the following tasks without assistance:

  • Able to use different paths to connect and control the BIG-IP (management IP, Self IP)
  • On the platform, execute information administration tasks (for example, capable of performing upgrades and licensing).
  • Open a help case and use online tools like AskF5, F5 iHealth, and DevCentral to learn about HTTP, ClientSSL, ServerSSL, TCP, UDP, and persistence profiles.
  • Use the GUI to perform administrative tasks - Recognize the differences and relationships among virtual servers, virtual server forms, virtual addresses, pools, pool participants, nodes, profiles, iRules, and address translation (NAT/SNAT).

F5 301a certification exam covers a wide range of topics, including the architecture and deployment of F5 BIG-IP LTM solutions, the configuration of virtual servers and pools, load balancing algorithms, SSL/TLS offloading, and iRules scripting. 301a exam consists of multiple-choice questions and requires a passing score of 69% or higher to earn the certification. Upon passing the exam, candidates will receive the F5 BIG-IP LTM Specialist certification, which is valid for two years. BIG-IP LTM Specialist: Architect Set-Up & Deploy certification is highly regarded in the IT industry and can lead to increased job opportunities and higher salaries.

 

NEW QUESTION # 77
An LTM Specialist plans to enable connection mirroring for a virtual server in an HA environment.
What must the LTM Specialist consider before implementing the configuration change?

  • A. Decreased number of possible concurrent connections to that virtual server
  • B. The add-on license that is required for this feature to be available
  • C. Creating the required separate interface for connection mirroring
  • D. Impact on system performance that might be noticeable

Answer: D

Explanation:
Connection mirroring will bring performance consumption


NEW QUESTION # 78
An HTTP monitor is created and assigned to a pool with the following non-default configuration:
Interval: 7 seconds
Timeout: 22 seconds
Reverse: Yes
Send String: GET/status.html HTTP/1.1/r/nHost:test.example.com/r/nConnector:Close Receive String: Up The HTTP server sends the following response:

What is the resulting pool status?

  • A. Unavailable (Enabled)
    Available (Enabled)
  • B. Unknown (Disabled)
  • C. Offline (Enabled)

Answer: A


NEW QUESTION # 79
An TLM Specialist has an Exchange that must use the LTM device to route traffic to the internet.
Which SNAT/NAT configure allows the Exchange server's traffic access the internet through the LTM device?

  • A. SNAT List
  • B. SNAT Automap
  • C. SNAT Pool
  • D. NAT

Answer: A


NEW QUESTION # 80
Refer to the exhibit.

A pool is contoured with four members. A user has a current connection established with 10.18.1.40. The virtual server has a persistence Profile configured.

  • A. 10.18.1.10
  • B. 10.18.1.30
  • C. 10.18.1.20
  • D. 10.18.1.40

Answer: D


NEW QUESTION # 81
Remote office users are having performance issues with a virtual hosted on the F5 LTM. The LTM Specialist reviews the configuration for the virtual server and determine that some settings are set with default profiles.
Which profile should the LTM Specialist enable to improve virtual server performance?

  • A. A FastL4 profile on the virtual server
  • B. A Stream profile for the remote user networks
  • C. A WAN optimized client side profile
  • D. An HTTP profile for the virtual server

Answer: C

Explanation:
They key word is that there are performance problem with Remote office users, no F5. The user experience can be improved through tcp optimization. The expression should be wom-tcp-wan-optimized in Protocol Profile (Client)


NEW QUESTION # 82
Refer to the exhibit

Given the bigip conf extract shown where the servers only talk http on port 80, which node will receive the next user request?

  • A. 10.1.1.2 0
  • B. 72.10.1.1
  • C. 10.1.1.3
  • D. 10.1.1.1

Answer: C


NEW QUESTION # 83
An LTM Specialist observes decreased performance and intermittent connection reap LTM system.

Based on the configuration, which action will address these issues?

  • A. Use an optimized TCP profile.
  • B. Use a FastL4 profile on the virtual server
  • C. Use a default caching profile on the virtual server.
  • D. Use a shorter idle timeout on the TCP profile.

Answer: D


NEW QUESTION # 84
A Web Server Administrator uses a manual process to display a page when the service is down.
Which feature on the LTM device should be used to automate the service down page? :

  • A. Redirect Rewrite
  • B. Action on Service Down
  • C. Enable Request Queueing
  • D. Fallback Host

Answer: D


NEW QUESTION # 85
An LTM device an application that requires all connections to be secured via SSL The device must verify that request contain a specific cookie before allowing the request to be sent to the pool member.
Which virtual server type should an LTM Specialist configure on the LTM device?

  • A. Performance (HTTP)
  • B. Performance (Layer 4)
  • C. Forwarding (IP)
  • D. Standard
  • E. Stateless

Answer: D


NEW QUESTION # 86
An LTM device provides load balancing to a web application? The LTM device has two dual-core processors and a licensed SSL Transactions Per Second (TPS) limit of 500 CMP is enabled.
TLS connections are used between client systems and virtual servers on the LTM device, as well as from the LTM device to servers used as part of LTM pool.
TLS enabled virtual servers utilize certificates based on 2048-bit keys During a peak period. 2560 new TLS transactions per second are attempted to the web application via the LTM device.
What will happen in this scenario?

  • A. 560 new TLS transactions will be silently discarded due to the SSL TPS license limit
  • B. Nothing: TLS transactions per second are NOT affected by an SSL TPS license limit
  • C. 2060 new TLS transactions will be silently discarded due to the SSL TPS license limit
  • D. Nothing: 2560 TLS transactions per second is within the SSI TPS license limit.

Answer: A


NEW QUESTION # 87
Refer to the exhibit.

The LTM devices LTM3 and LTM2 have four Traffic Groups defined with approximately the sar of failover objects defined in each group.
- Traffic Groups A and C have Default Device set to LTM1
- Traffic Groups Band D have Default Device set to LTM2.
- Traffic Groups B and C do NOT have Auto Failback enabled. Traffic Groups A and D have Auto Failback enabled with a timeout value of 60 seconds.
- Traffic Groups A and D have Auto Fallback enabled with a timeout value of 60 seconds.
Both LTM devices are healthy and able to pass traffic for any Traffic Group.
LTM1 loses connectivity on interface 1.4. The LTM Specialists notified 60 seconds after the interface goes down.
What is the state of the Traffic Groups on each LTM device?

  • A. LTM1: Traffic Groups A, B, C, and D
    LTM2: No Traffic Groups
  • B. LTM1: No Traffic Groups
    LTM2: Traffic Groups A, B, C, and D
  • C. LTM1: Traffic Group C
    LTM2: Traffic Groups A, B, and 0
  • D. LTM1: Traffic Groups B and C
    LTM2: Traffic Groups A and 0

Answer: B

Explanation:
If the 1.4 port is down and failsafe is triggered, the whole machine will become a standby, and all Traffic Groups will be cut away, and no Traffic Group will remain.


NEW QUESTION # 88
An application is sensitive to packet loss and unexpected session termination. A pair of LTM devices is configured in an Active/Standby high availability configuration. SNATS are NOT used and the virtual server contains a Universal Persistence profile.
which two actions must an LTM Specialist take to ensure the sessions are maintained between the client and server during an LTM device failover event while maintaining maximum uptime? (Choose two.)

  • A. configure a OneConnect profile to mirror connections
  • B. configure a serial failover cable for mirror traffic
  • C. enable Mirroring for a virtual server and persistence profile
  • D. enable Clone Pools for a virtual server and a persistence profile
  • E. configure a VLAN and primary mirroring address for mirror traffic

Answer: C,E


NEW QUESTION # 89
An SSL application is being migrated to the LTM device. Both encrypted and unencrypted traffic are accepted by the server. The virtual server configuration is as follows:

Which LTM device profile should be used on the LTM device to reduce the CPU load on the current.

  • A. clientsssl
  • B. serverssl
  • C. Protocol
  • D. stream

Answer: A


NEW QUESTION # 90
AN LTM Specialist receives reports that an external company application is having reliability issues. The F5 Administrator finds the following in /vat/log/ltm file.

The LTM Specialist determines that the F5 LTM device is entering into Aggressive Mode Adaptive Reaping, which is causing the site reliability issues.
What is the most likely reason that the LTM device has entered into Aggressive Mode Adaptive Reaping?

  • A. The site has too many licensed modules.
  • B. The LTM device has not provisioned AVR.
  • C. The site is under DDOS attack
  • D. The LTM device exceeds licensed traffic limits.

Answer: C


NEW QUESTION # 91
An LTM Specialist is configuring a virtual server with an IP address.
Which configuration is unsupported?

  • A. Standard virtual server with an HTTP profile
  • B. Standard virtual server with a TCP profile
  • C. Performance 14 virtual server with a FastHTTP profile
  • D. Performance 14 virtual server with an HTTP profile

Answer: D


NEW QUESTION # 92
A LTM device needs to load balance active and passive FTP traffic while using only a single virtual server.
Which virtual server type should an LTM Specialist configure on the LTM device?

  • A. DHCP relay
  • B. Forwarding (IP)
  • C. Forwarding (Layer 2)
  • D. Standard
  • E. Stateless

Answer: B


NEW QUESTION # 93
Refer to the exhibit.

The http monitor is applied to a pool All members are enabled One pool member stops responding TCP port 80. The server still responds to ping.
What is the resulting status of this pool member?

  • A. Offline (Disabled)
  • B. Unknown (Enabled)
  • C. Unavailable (Disabled)
  • D. Available (Enabled)

Answer: D


NEW QUESTION # 94
When importing a PEM formatted SSL certificate, which text needs to appear first in the file?

  • A. ...SECURITY CERTIFICATE....
  • B. ...SSL CERTIFICATE....
  • C. ...BEGIN CERTIFICATE....
  • D. --START CERTIFICATE....

Answer: C


NEW QUESTION # 95
AN LTM Specialist is using an external monitor evaluate the hard drive usage of a node. The monitor has marked the node down because it exceeded the specific threshold. The disk usage on the server has been corrected below the threshold, however, the node remains offline.
Which feature is causing this problem?

  • A. The parameter Time Until UP has a value greater than 0
  • B. The value for UP interval is enable with a value greater than 0
  • C. The value for Manual Resume is set to Yes
  • D. The value of Manual Resume is set to No

Answer: C


NEW QUESTION # 96
An LTM Specialist must create a new virtual server for HTTP access. The LTM Specialist creates a forwarding virtual server to reach the resource.
What is a potential result of this action?

  • A. Packet filter allowances are also required
  • B. Other service ports could be allowed
  • C. HTTP traffic is NOT allowed
  • D. IP conflict result

Answer: C


NEW QUESTION # 97
An TLM Specialist needs to configure a virtual server to terminate SSL connection on the LTM device.
Cryptographic information must be re-authorized for SSL sessions that remain open for longer than 30 seconds.
Which settings should the LTM Specialist configure in the client SSL profile?

  • A. enable Require Peer SN1 Support
  • B. set the Renegotiate Period to 30 seconds
  • C. set the Renegotiate Max Record Delay to 30
  • D. set the Handshake Timeout to 30 seconds

Answer: B


NEW QUESTION # 98
Remote users who access the LTM device are authenticated via Radius. The default remote user role is Guest Some users need LTM device with the Administrator role. The F5 Radius attributes are configure on the Radius server.
Which configuration item needs to be created?

  • A. User account
  • B. Remote User role
  • C. User role
  • D. Admin account

Answer: B


NEW QUESTION # 99
Exhibit.

The LTM devices LTM1 and LTM2 are configured in a Device Group (Sync Failover) with Network Failover configured on both the management and HA and Internal VLANS. and ConfigSync is confined in a Device Group (Sync Failover) with Network Failover and internal are tagged on a single trunk with subnets Connection Mirroring is configured on both the HA interlace directly connected between LTM1 and LTM2, and the management interlace is connected to a management switch. The LTM devices have four Traffic Groups defined, and both LTM devices are healthy and capable of passing traffic for any of the Traffic Groups.
An LTM Specialist disconnects the cable for the HA network in an effort to test failover.
Which HA functionality works in this case?

  • A. ConfigSync does NOT work. Connection Mirroring floes NOT work.
  • B. ConfigSync works Connection Mirroring works
  • C. ConfigSync does NOT work; Connection Mirroring works
  • D. ConfigSync works. Connection Mirroring docs NOT work

Answer: C


NEW QUESTION # 100
Refer to the following iRule:

What is a complete list of profiles that must be applied to the virtual server for this iRule?

  • A. Fast L4 , HTTP, Stream
  • B. Fast L4, HTTP
  • C. TCP, HTTP
  • D. TCP, HTTP, Client SSL

Answer: C


NEW QUESTION # 101
......


F5 301a exam, also known as the BIG-IP LTM Specialist: Architect Set-Up & Deploy exam, is designed to assess the skills and knowledge of IT professionals who work with F5 BIG-IP Local Traffic Manager (LTM) products. 301a exam covers a wide range of topics related to the design, configuration, and deployment of F5 BIG-IP LTM solutions, including network architecture, traffic management, security, and high availability.

 

Latest 301a Pass Guaranteed Exam Dumps Certification Sample Questions: https://www.dumpsquestion.com/301a-exam-dumps-collection.html

301a Exam with Guarantee Updated 150 Questions: https://drive.google.com/open?id=1RZETmJdiFTwTFYkJdyBU504nqV951wMU