[Sep-2021] Pass 301a Exam in First Attempt Updated301a DumpsQuestion Exam Question
LTM Specialist Dumps 301a Exam for Full Questions - Exam Study Guide
NEW QUESTION 49
AN LTM Specialist receives reports that an external company application is having reliability issues. The F5 Administrator finds the following in /vat/log/ltm file.
The LTM Specialist determines that the F5 LTM device is entering into Aggressive Mode Adaptive Reaping, which is causing the site reliability issues.
What is the most likely reason that the LTM device has entered into Aggressive Mode Adaptive Reaping?
- A. The LTM device has not provisioned AVR.
- B. The LTM device exceeds licensed traffic limits.
- C. The site has too many licensed modules.
- D. The site is under DDOS attack
Answer: D
NEW QUESTION 50
An LTM device load balances a pool of routers. The LTM device needs to verify path availability to an HTTP server with the IP address 192 168.10 10. located beyond the routers.
Which monitor type and parameters arc required?
- A. TCP monitor, change transparent option to Yes, and sot the alias to port 80
- B. TCP monitor change transparent option to Yes. set alias address 192.168.10.10. and set the alias to port 80
- C. TCP monitor, alias address 192.168.10.10. and set the alias to port 80
- D. HTTP monitor alias address 192 168.10 10. and set the alias to port 80
Answer: B
NEW QUESTION 51
The network team has recently added a new syslog server with IP address 10.1.1.1.
Which command adds the new syslog entry on the F5 LTM device?
A)
B)
C)
D)
- A. Option D
- B. Option C
- C. Option A
- D. Option B
Answer: B
NEW QUESTION 52
An LTM Specialist needs to assign a health monitor to a pool with two pool members 10.10.10 101 and 10.10.10.102 Both pool members are listening on port 8080 with TCP. The health of the application depends on the health of an another server (10 10 10 100) that runs port 9080 with TCP.
Which two custom TCP monitors should be selected as the pool's health monitors' (Choose two)
- A. a custom TCP monitor that works on port 8080 with 10.10.10.102 is alias address
- B. a custom TCP monitor that works on port 8080 with 10.10.10.101 as alias address
- C. a custom TCP monitor that works on port 8080
- D. a custom TCP monitor that works on port 9080,
- E. a custom TCP monitor that works on port 9080 with 10,10.10.101 as alias address
- F. a custom TCP monitor that works on port 9080 with 10.10.10.100 as alias address
Answer: C,F
NEW QUESTION 53
Exhibit.
Webserver_pool consists of 6 members. phpAuction_80_pool consists of 2 members LTM1 is the current Active member.
LTM1 loses connectivity to 3 of the 6 members in the webserver_pool LTM2 still has connectivity to all servers.
What is the expected failover behavior?
- A. LTM1 Standby / LTM2 Active
- B. LTM1 Active / LTM2 Standby
- C. LTM1 Active /LTM2 Active
- D. LTM1 Standby / LTM2 Standby
Answer: B
NEW QUESTION 54
An LTM Specialist configures a new HTTPS virtual server that contains a valid example.com ssl certificate. The LTM Special receives an error in the browser when connecting.
What must be added to the SSL Client profile to fix this issue?
- A. An intermediate certificate
- B. A sell-sign certificate
- C. A public root certificate
- D. A new example com certificate
Answer: A
NEW QUESTION 55
An LTM Specialist needs to enable TCP connection re-use for a non-HTTP application. The application uses a simple request response protocol where each request and response is contained within a single packet.
Which configuration option should the LTM Specialist adjust?
- A. assign a OneConnect profile
- B. increase the connection limit for pool members
- C. increase the idle Timeout in a custom TCP profile
- D. use a Performance (Layer 4) Virtual Server
Answer: A
NEW QUESTION 56
An LTM device needs to be configured a virtual server. The application requires SSL encryption from the client to the server and an X-Forwarded-For added by the LTM device.
Which virtual server type should the LTM Specialist use?
- A. Forwarding (IP)
- B. Performance
- C. Performance (HTTP)
- D. Standard
- E. Stateless
Answer: D
NEW QUESTION 57
An LTM specialist needs to upgrade a VCMP quest in an HA Setup with minimum interruption for all VCMP guest instances.
In which should the LTM Specialist perform this upgrade?
- A. Failover all guests' active traffic-group to the other Host, Relicense the host, copy image to guest, create guest UCS, install and set boot location to new volume , reboot
- B. Failover all guests' active traffic-group to the other host, copy image to guest, create guest UCS install and set boot location to new volume, reboot, Relicense the host
- C. Failover this specific guest's active traffic-group to the other Host, Relicense the guest, copy image to guest , create guest UCS, install and set boot location to new volume, reboot
- D. Relicense the host. Failover all guest's active traffic-groups to the other host, copy image to gest, create guest UCS install and set boot location to new volume, reboot
Answer: A
Explanation:
Switch guest, reactive, license first and then upgrade.
NEW QUESTION 58
Refer to the exhibit.
The pool shown is configured with four pool members in a variety of states. The application is receiving a large number of request. The LTM Specialist needs to make changes to make sure that all members receive the same levels of traffic.
Which changes need to be made?
- A. Enable 10.80.1.40 disable priority group activation, enable ratio
- B. Enable 10.80.1.40 and 10.80.1.1.20 disable group activation, enable Round Robin
- C. Enable 10.80.1.40 and 10.80.1.20 disable priority group activation, enable ratio.
- D. Enable 10.80.1.20 disable priority group activation, enable Round Robin
Answer: B
NEW QUESTION 59
An ITM Specialist has the configuration shown:
The LTM Specialist needs to create a new virtual server in part B.
Which virtual address(es) should be used for the new virtual server?
- A. 10.120.0.1 only
- B. 10.90.0.1 and 10.12.0.1
- C. 10.100.0.1 and.10.120.0.1
- D. 10.90.0.1 and 10.100.0.1
Answer: C
NEW QUESTION 60
A virtual server with SNAT automap enabled selects pool member 10.20.0.10.443 for the server-side flow. The client side flow source IP is 192.168.0.10 .
Which source IP should be expected in the server-side connection?
- A. 10.50.0.2
- B. 10.20.0.2
- C. 10.20.0.1
- D. 192.168.0.10
Answer: B
NEW QUESTION 61
To improve application security, an LTM Specialist must configure a BIG application access. The BIG IP system to authenticate the client certificate before permitting application access. The BIG-IP system must also support the ability to red to redirect users to a certificate enrolment system without generating a browser error.
Within the Client SSL profile, which value should the LTM Specialist select for the Client Certificate option?
- A. Require
- B. Request
- C. ignore
- D. Demand
Answer: A
NEW QUESTION 62
Refer to the Exhibit.
An LTM Specialist notices that two members in a pool are overloaded. To relive the existing members a fourth member (10.128.20.14) is brought up.
How many member will receive and process new connections?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION 63
A virtual server configuration for traffic destined to a server is as shown:
FTP traffic is destined to the 192.168.1.101 server from the source of 192.168.2.129.
Based on precedence, which virtual server accepts this traffic?
- A. MyV53
- B. MyVS1
- C. MyVS2
- D. MyVS4
Answer: C
NEW QUESTION 64
......
Authentic Best resources for 301a Online Practice Exam: https://www.dumpsquestion.com/301a-exam-dumps-collection.html
Get the superior quality 301a Dumps with explanations waiting just for you, get it now: https://drive.google.com/open?id=1ZuXm2Mb4-lHnOBlScAbMMVB2LagIGzTv