Get instant access to NS0-173 Practice Tests 2021 Free Updated Today!
Welcome to download the newest PassLeader NS0-173 PDF dumps ( 62 Q&As)
NEW QUESTION 30
Which two Unified Computing System capabilities are required to achieve stateless computing? (Choose two.)
- A. service profiles
- B. blade servers
- C. boot from SAN
- D. templates
Answer: A,B
Explanation:
Cisco introduced the idea of stateless computing with its blade server design.
A Cisco UCS instance allows you to quickly align computing resources in the data center with rapidly changing business requirements. This built-in flexibility is determined by whether you choose to fully implement the stateless computing feature.
Pools of servers and other system resources can be applied as necessary to respond to workload fluctuations, support new applications, scale existing software and business services, and accommodate both scheduled and unscheduled downtime. Server identity can be abstracted into a mobile service profile that can be moved from server to server with minimal downtime and no need for additional network configuration.
NEW QUESTION 31
A client has a FlexPod Datacenter solution with four active fabric links in port channel mode established between the Cisco Fabric Interconnects and the IOMs on a Cisco 5108 blade chassis. The blade chassis is fully populated with Cisco UCS B200M5 blades. A worker in the data center inadvertently unplugs the fourth uplink cable from IOM-A while working in the rack.
In this scenario, what happens to the network traffic?
- A. Connectivity for servers 3, 4, 7, and 8 all fail over to IOM-B.
- B. Traffic is load-balanced within IOM-A.
- C. There is a loss of connectivity for servers 4 and 8.
- D. Traffic is load-balanced within IOM-B.
Answer: A
NEW QUESTION 32
You are configuring high availability within the network layer of your FlexPod configuration.
In this scenario, what are two Cisco best practices for designing vPC on your Cisco 9000 Series switches?
(Choose two.)
- A. Port channels should be configured for LACP passive mode.
- B. Peer keep-alive connectivity between the switches should be established.
- C. A minimum of four 10GB Ethernet connections are required for vPC.
- D. The vPC auto-recovery feature should be enabled.
Answer: B,C
Explanation:
vPC also relies on the periodic keepalive messages to determine when one of the connected devices on the peer link fails.
vPC peer link - The link used to synchronize states between the vPC peer devices. Both ends must be on 10- Gigabit Ethernet or 40-Gigabit Ethernet interfaces.
Reference:
configuration/guide/b_Cisco_Nexus_9000_Series_NX-OS_Interfaces_Configuration_Guide/ b_Cisco_Nexus_9000_Series_NX-OS_Interfaces_Configuration_Guide_chapter_0111.html
NEW QUESTION 33
A customer wants to deploy FlexPod for a VDI solution with 10,000 users, each with 10 GB of storage allocated.
To support this configuration, which three components must be sized? (Choose three.)
- A. the optical cable length
- B. the fabric interconnect ports
- C. the Cisco UCS servers
- D. the 1GbE ports from user systems
- E. the NetApp AFF storage
Answer: B,C,D
NEW QUESTION 34
You are asked to design a FlexPod solution with a Cisco UCS B-Series chassis. There is no requirement for any Cisco UCS C-Series rack servers. You must ensure that there is a minimum of a 2500 VLAN or VSAN capacity per UCS domain.
In this scenario, which Cisco Fabric Interconnects do you select?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION 35
A customer with a FlexPod Express solution wants to enable remote access to the NetApp storage component.
In this scenario, which two access methods are recommended? (Choose two.)
- A. Telnet
- B. RDP
- C. SSH
- D. SAML
Answer: A,C
NEW QUESTION 36
Click the Exhibit button.
You are designing a FlexPod Datacenter solution for Microsoft Windows 2012 with Hyper-V. All hosts will boot from the SAN, including management hosts. The management hosts are Cisco C-Series servers.
Referring to the exhibit, which adapters are required to boot the management servers from the SAN?
- A. two 1GbE NICs
- B. two 10GbE NICs
- C. two 10GbE CNAs
- D. two 8Gb HBAs
Answer: B
NEW QUESTION 37
A customer recently configured its Cisco UCS, and within the Chassis Discovery policy, they set the link group preference to Port Channel.
Which two benefits would they derive from this link group preference? (Choose two.)
- A. All the links between the Cisco Fabric Interconnects and chassis IOM are shared.
- B. Traffic is load balanced across the links.
- C. All the links between the Cisco Fabric Interconnects and chassis IOM are pinned.
- D. Each blade has an assigned Cisco Fabric Interconnects link.
Answer: A,B
NEW QUESTION 38
Click the Exhibit button.
A customer wants to ensure that FlexPod Datacenter connections to the storage layer are highly available. Which two configurations shown in the exhibit satisfy the customer's requirements? (Choose two.)
- A. III.
- B. IV
- C. I.
- D. II.
Answer: A,B
NEW QUESTION 39
You want to deploy a FlexPod Datacenter solution based on the minimum hardware requirements.
Which three components must be deployed in highly available pairs to accomplish this task? (Choose three.)
- A. Cisco UCS Fabric Interconnects
- B. NetApp FAS Storage Controllers
- C. Cisco USC Nexus Switches
- D. Cisco APICs
- E. Cisco UCS 5108 Chassis
Answer: A,B,E
NEW QUESTION 40
You are asked to design a FlexPod solution that meets the minimum requirements and includes Application Centric Infrastructure (ACI).
Which three Cisco components are required in this scenario? (Choose three.)
- A. Cisco Nexus 3000 Series switches
- B. Cisco Nexus 9000 Series switches
- C. Cisco Nexus 2000 Series Fabric Extender
- D. Cisco UCS Series Fabric Interconnects
- E. Cisco UCS B-Series servers
Answer: B,D,E
NEW QUESTION 41
A customer is designing a FlexPod solution to use both NFS and iSCSI for connectivity, including traditional FC for legacy applications. The Cisco UCS Fabric Interconnects will be connected to both Nexus 9000 Series switches and FC switches.
Which UCS capability allows you to accomplish this task?
- A. SAN pin groups
- B. VSANs
- C. FC uplink ports
- D. unified ports
Answer: D
NEW QUESTION 42
Your customer has a FlexPod configuration with a 4-node NetApp AFF A300 storage cluster that uses only NSE drives.
Which two solutions allow the customer to expand the current storage system? (Choose two.)
- A. a DS4246 with twenty-four 6 TB NL-SAS HDDs
- B. a two-node FAS8200 with a 4 TB NL-SAS HDD
- C. a DS224C with twenty-four 3.8 TB SSDs
- D. a two-node AFF A200 with a 3.8 TB NSE SSD
Answer: B,C
NEW QUESTION 43
Which two NetApp storage controllers would be used in a valid FlexPod Datacenter configuration? (Choose two.)
- A. NetApp E2800
- B. NetApp AFF A700
- C. NetApp FAS2700
- D. NetApp EF570
Answer: B,C
NEW QUESTION 44
A customer has a FlexPod Express configuration with a FAS2720 system. The company has opened a new remote location and will purchase a FlexPod Express configuration with a FAS2750 system. The business requires that the data be replicated to the new location.
Which two software applications accomplish this task? (Choose two.)
- A. FlexCache
- B. SnapVault
- C. SnapRestore
- D. SnapMirror
Answer: A,D
Explanation:
FlexClone®: Instant virtual copies with file and volume granularity
SnapMirror®: Integrated data replication technology for simple, efficient, flexible disaster recovery and backup use cases
NEW QUESTION 45
A customer with a FlexPod Express configuration is currently operating Linux servers. The company wants to move to a Windows-centralized access method for the NetApp storage component.
In this scenario, which two ONTAP features must be configured? (Choose two.)
- A. SVM with the SMB protocol enabled
- B. Active Directory security model
- C. Workgroup security model
- D. SVM with the NFS protocol enabled
Answer: A,B
NEW QUESTION 46
A service provider is designing a FlexPod configuration to host multiple customers in a hybrid cloud environment, where IP address-range conflicts might arise on the shared storage.
Which NetApp feature should be enabled to prevent these conflicts?
- A. IPspaces
- B. failover groups
- C. SVMs
- D. broadcast domains
Answer: A
NEW QUESTION 47
Click the Exhibit button.
Referring to the exhibit, what is the name given to the link between the two Cisco Nexus switches?
- A. vPC peer link
- B. vPC peer domain
- C. vPC Domain ID
- D. vPC peer connection
Answer: A
NEW QUESTION 48
A customer wants to deploy a FlexPod solution that involves directly connecting the NetApp AFF storage using the FCoE protocol to the Cisco UCS Fabric Interconnects.
In this scenario, which Cisco UCS Fibre Channel mode would be used to accomplish this task?
- A. access mode
- B. switching mode
- C. end host mode
- D. trunk mode
Answer: B
NEW QUESTION 49
Your customer wants assurances that all aspects of FlexPod are highly available.
Which statement is correct in this scenario?
- A. Cisco UCS Manager contains multiple UCS domains.
- B. Cisco UCS Manager uses active-active architecture.
- C. Cisco UCS Manager maintains a replica of configuration information.
- D. Cisco UCS Manager automatically copies its configuration data to a remote data store.
Answer: C
Explanation:
The management and data plane of Cisco UCS is designed for high availability and redundant access layer fabric interconnects. In addition, Cisco UCS supports existing high availability and disaster recovery solutions for the data center, such as data replication and application-level clustering technologies.
NEW QUESTION 50
An architect is designing a FlexPod environment with Cisco Nexus 5000 switches to SAN boot all of the ESXi hosts over FC.
In this scenario, what should the LUN ID number be?
- A. LUN 3
- B. LUN 1
Section: (none)
Explanation - C. LUN 2
- D. LUN 0
Answer: D
NEW QUESTION 51
Which port type would you configure when you connect a chassis to the Cisco Fabric Interconnects?
- A. FC storage ports
- B. Ethernet uplink ports
- C. appliance ports
- D. server ports
Answer: A
NEW QUESTION 52
The storage administrator must change the vHBA settings bound to a template associated with a production server.
What happens when the settings are reconfigured in this scenario?
- A. The vHBA template is deleted from UCS Manager.
- B. The vHBA configuration change does not affect LUN access.
- C. The service profile template that is associated with the server is initialized.
- D. The server that is associated with the service profile reboots.
Answer: C
NEW QUESTION 53
......
Sep-2021 Latest DumpsQuestion NS0-173 Exam Dumps with PDF and Exam Engine: https://www.dumpsquestion.com/NS0-173-exam-dumps-collection.html