Nov-2021 Latest DumpsQuestion HPE0-J68 Exam Dumps with PDF and Exam Engine Free Updated Today!
Following are some new HPE0-J68 Real Exam Questions!
NEW QUESTION 58
A customer has an existing configuration consisting of first class and nearline SAS drive in an 8000 SFF enclosure. They add two SFF 8000enclosure that are fully populated with nearline drives to an existing HPE 3Par storeserv 8400 array. What should the customer do to optimize their storage configuration?
- A. Run tunesys and on the array (275)
- B. Create new CPG for the newly installed drivers
- C. Enable space reclamation
- D. Defrag the CPG and run align drive on their system
Answer: A
NEW QUESTION 59
After a performance analysis, a customer plan to reorganize his adaptive Flash cache (AFC) configuration and want to raise it from 256 to 768GB. Which action is needed to take advantage of the new AFC configuration?
- A. Run tunesys after raising the AFC to take advantage of the additional space
- B. Increase current AFC configuration to reflect the additional space
- C. Remove flash cache for all VVS then run create Flash cache
- D. Remove the old AO configuration and recreate a new one
Answer: C
NEW QUESTION 60
Which management interface uses four basic commands (Create ,read, update ad delete )to enable administrators to define ad radically simply management processes?
- A. WEBEM
- B. SMI-S
- C. Rest API
- D. WMI
Answer: C
NEW QUESTION 61
A customer recently acquired another company and found that the existing infrastructure was outdated and costly to maintain. They need to put a complete infrastructure solution in place that minimizes the footprint in the data center as quickly and possible. Which solution you recommend?
- A. Synergy 12000
- B. Converged systems
- C. Bladesystem 7000
- D. Simplicity 380
Answer: D
NEW QUESTION 62
Which software feature should an HPE 3PAR Storeserv 8000 customer use to optimize data protection and recovery, Including rapid online recovery for his VMware environment?(select two)
- A. HPE 3PAR File persona Software suite
- B. HPE 3PAR Remote copy software
- C. HPE StoreOnce recovery manager central for VMware
- D. HPE 3PAR Virtual Copy software
- E. HPE 3PAR Security software suite
Answer: C,D
NEW QUESTION 63
Which storage sizing tool, designed for HPE 3PAR StoreServ, can be used to determine whether customers quality for the Get Thin Guarantee Program?
- A. NinjaStars
- B. NinjaProtected
- C. NinjaCrawler
- D. StoreVista
Answer: B
Explanation:
By performing a free NinjaProtected backup assessment, HPE and its partners can demonstrate how customers can reduce the amount of backup data they need to store by 95%-guaranteed (HPE StoreOnce Get Protected Guarantee Program
NEW QUESTION 64
What allows volume level data to be copied between an HPE 3PAR and an HPE store Virtual VSA?
- A. StoreServ Peer Motion
- B. Store virtual Peer motion
- C. HPE 3PAR Remote Copy
- D. Recovery Manager central
Answer: D
NEW QUESTION 65
Exhibit:
Which fabric design is shown?
- A. cascaded
- B. single fabric
- C. core-edge
- D. meshed
Answer: D
NEW QUESTION 66
A Company using an existing 1GB ISCSI storage array is experiencing storage access performance issue. They are interested in deploying HPE 3PAR Storeserv with 16GB /S FC end to-end to improve the performance to the minimal changes to the environment. The existing environment consists of these HPE products
* HPE C7000 Blade system platinum blade enclosure with HP virtual connect Flex 10 interconnect modules.
* Configuration of HPE Proliant Gen8 and Gen9 blade servers
* HPE 2920 Switches
Which HPE products must be included to support new HPE 3PAR Storeserv?(Select two)
- A. HPE 16GB/s Fibre channel HBA for Blade servers
- B. HPE Virtual connect Flex fabric 20/40 f8 modules
- C. HPE Flex fabric 20GB,2-Port 630 FLB adapter
- D. HP 5900CP switch series with 16GB/S SFP+ Modules
- E. HPE B-Series 16GB SAN switch for HPE Blade system C-class series
Answer: A,E
NEW QUESTION 67
Which resource provides configurations for HPE tested and referenced configurations in a software-defined storage environment?
- A. One Config Advanced
- B. StoreVirtual VSA Ready Nodes
- C. NinjaStars
- D. HPE Storage Sizer
Answer: B
Explanation:
HPE StoreVirtual VSA Ready Nodes-HPE tested reference configurations on HPE ProLiant servers that address typical virtualization and remote office use cases, and deployment of converged solutions.
NEW QUESTION 68
Which built-in HPE 3PAR StoreServ technology reduces database transaction logs response time?
- A. Express Writes
- B. Thin Deduplication
- C. Adaptive Flash Cache
- D. Thin provisioning
Answer: C
NEW QUESTION 69
A customer has an excisting environment with 3PAR,Nimble and MSA.
They are providing file
servicing from all arrays with multiple virtual machine but preference is not adequate.
What should you add to the environment to increase performance ,increase availability, and reduce management overhead?
- A. StoreEasy 5000
- B. Simplvity 380
- C. StoreEasy 3850 Gateway
- D. 3PAR File Persona
Answer: C
NEW QUESTION 70
You are demonstrating adding a new virtual volume for an HPE 3PAR Storeserv array for your customer.in addition to the volume name ,What is the minimum information required to create a virtual volume(select two)
- A. Domain
- B. Persona type
- C. Size
- D. Host
- E. CPG
Answer: C,E
NEW QUESTION 71
A customer has mission-critical applications that intermittently experience heavy disk I/O. The storage speed has the most impact on the application's performance. The customer does not want to dedicate SSD disks to these applications because additional performance is only needed periodically, and moving the volumes between tiers takes too long.
Which HPE StoreVirtual VSA feature can address this customer's challenge?
- A. Storage virtualization
- B. Thin Provisioning
- C. Space Reclamation
- D. Adaptive Optimization
Answer: D
NEW QUESTION 72
A customer has a SAN infrastructure with the HPE C-class blade Enclosure ,and a mix of proliant G7,gen8 and Ge9 server .They require a new storage platform ... How can you confirm the storage array will be supported in the existing environment?
- A. Design and array with the latest firmware ,and recommend that the customer engage HPE point Next to upgrade the existing hardware
- B. Design an array with older version of the firmware to ensure compatibility
- C. Document existing server and SAN information ,and consult SPOCK to ensure firmware compatibility
- D. Check recommended firmware levels in the HP SAN design reference guide to ensure firmware compatibility
Answer: C
NEW QUESTION 73
Which 3PAR storeServ feature allow to host to continue I/O uninterrupted during a firmware update?
- A. Persistent port (96)
- B. Peer persistence
- C. Persistent Memory
Answer: A
Explanation:
D Persistent Cache
NEW QUESTION 74
A customer is interested in integrating their HPE 3PAR StoreServ arrays into their OneView environment to support automated volume provisioning.
What must you install to enable the integration?
- A. HPE SAN Network Advisor Enterprise
- B. HPE SAN Network Advisor Professional
- C. OneView Global Dashboard
- D. 3PAR Host Explorer
Answer: A
NEW QUESTION 75
You are planning a single-site Nimble solution with iSCSI connectivity. Two 10GbE SFP+ dual port NICs are included in the configuration. You designed an Intelligent Resilient Framework (IRF) stack with HPE FlexFabric 5900CP switches.
Which statement is correct when discussing the IRF limits for this configuration?
- A. The used IRF ports for iSCSI traffic have to be configured as 10GbE converged ports.
- B. When connecting an iSCSI storage to an IRF stack, a minimum of four 10GbE ports must be used per switch.
- C. A maximum of two switches can be used in an IRF stack when connecting storage.
- D. In an IRF stack with storage connectivity, the 40GbE ports cannot be used.
Answer: B
NEW QUESTION 76
A customer with restricted budget has an existing HPE 3PAR storeserver 8200 using 10kfast class and near line drives because of the implementation of new application .the workload has shifted to be read intensive therefore ,they want to increase the read I/O performance What should they add to their environment ?
- A. Two 400 GB SSD drives and enable adaptive flash cache (page 173) eed to check
- B. A tier of SSD and implement thin provisioned virtual volume
- C. A tier with 15k fast class 600 GB drive for new CPG, configure AO policy to advantage of new resources
- D. A tier with 15k fast class drive and implement thin provisioned deduplicated virtual volumes
Answer: A
NEW QUESTION 77
During a proof-of-concept you need to implement an inter-switch-link (ISL)between two HPE SN6000B switches. Which port mode must be set enable communication between the switches?
- A. F_PORT
- B. FL_PORT (WRONG)
- C. E_PORT (Correct)
- D. N_PORT
Answer: C
NEW QUESTION 78
Which value does an HPE Nimble solution provide in addition to other HPE storage solutions
- A. Flat support pricing for all hardware components
- B. Upfront option for free controller upgrade after 3 years
- C. All inclusive software licensing over 5 years and additional capacity upgrades
- D. Tier 1 and tier 2 phone support
Answer: D
NEW QUESTION 79
A customer want to implement a virtualized environment and want to provide independent storage access to individual virtual servers. Which feature need to enabled on the B-series FC switches to support this solution?
- A. NPIV
- B. FCIP
- C. RSCN
- D. ALPA
Answer: A
NEW QUESTION 80
Match the type of storage found in today's market to the HPE storage solution optimized for that capacity?
- A. Nimble - Block
- B. StoreVirtual - Block
- C. MSA - Block
- D. Scalability - Object
- E. StoreEasy - File
- F. HPE 3PAR StoreServ - Block
Answer: F
NEW QUESTION 81
A customer need to implement a new SAN fabric for their growing environment .The new SAN should provide a high performance and port-efficient network with many-to-many connectivity .Because of changing requirement and the possible acquisition of another company in the near future. The customer cannot predit the I/O traffic pattern within the SAN .The customer also concerned about availability. Which type of SAN topology should you recommend?
- A. Cascaded fabric
- B. Meshed fabric
- C. Core-edge fabric
- D. Single switch fabric
Answer: B
NEW QUESTION 82
......
Resources From:
- 2021 Latest DumpsQuestion HPE0-J68 Exam Dumps (PDF & Exam Engine) Free Share: https://www.dumpsquestion.com/HPE0-J68-exam-dumps-collection.html
- 2021 Latest DumpsQuestion HPE0-J68 PDF and HPE0-J68 Exam Dumps Free Share: https://drive.google.com/open?id=1kG3pgj6JoQopED9pT-b2ve_jgkB6DM_e
Free Resources from DumpsQuestion, We Devoted to Helping You 100% Pass All Exams!