NSE 5 Network Security Analyst NSE5_FSM-6.3 Dumps | Updated Dec 25, 2024 - DumpsQuestion
Master 2024 Latest The Questions NSE 5 Network Security Analyst and Pass NSE5_FSM-6.3 Real Exam!
Fortinet NSE5_FSM-6.3 Certification Exam is a valuable certification for IT professionals who want to demonstrate their expertise in Fortinet FortiSIEM technology. It is an advanced-level exam that tests the ability of IT professionals to design, deploy, configure, and manage Fortinet FortiSIEM solutions in real-world environments. By passing NSE5_FSM-6.3 exam, IT professionals can gain recognition in the industry and advance their careers in network and security management.
Fortinet NSE5_FSM-6.3 Exam is a valuable certification for security professionals seeking to enhance their skills and knowledge in FortiSIEM 6.3. NSE5_FSM-6.3 exam validates the ability of candidates to monitor and analyze security events, detect and respond to security threats, and maintain compliance with industry regulations. By passing the Fortinet NSE5_FSM-6.3 Exam, candidates can demonstrate their expertise in using FortiSIEM 6.3 to protect their organization's network and data against cyber threats.
To prepare for the Fortinet NSE5_FSM-6.3 certification exam, candidates should have a solid understanding of network security concepts and technologies, as well as experience working with FortiSIEM 6.3. Candidates should also be familiar with the latest industry trends and best practices related to SIEM solutions. Fortinet offers a number of training and certification programs to help candidates prepare for NSE5_FSM-6.3 exam.
NEW QUESTION # 13
A FortiSIEM is continuously receiving syslog events from a FortiGate firewall. The FortiSIEM administrator is trying to search the raw event logs for the last two hours that contain the keyword tcp . However, the administrator is getting no results from the search.
Based on the selected filters shown in the exhibit, why are there no search results?
- A. The keyword is case sensitive Instead of typing TCP in the Value field. the administrator should type tcp.
- B. In the Time section, the administrator selected the Relative Last option, and in the drop-dawn lists, selected 2 and Hours as the time period. The time period should be 24 hours.
- C. The administrator selected AND in the Next drop-down list. This is the wrong boolean operator.
- D. The administrator selected - in the Operator column That a the wrong operator.
Answer: D
NEW QUESTION # 14
Which three ports can be used to send Syslogs to FortiSIEM? (Choose three.)
- A. UDP 162
- B. UDP9999
- C. TCP 1470
- D. UDP 514
- E. TCP 514
Answer: C,D,E
Explanation:
Syslog Ports: Syslog messages can be sent over different ports using TCP or UDP protocols.
Common Ports for Syslog:
* UDP 514: This is the default port for sending syslog messages over UDP.
* TCP 514: This is the default port for sending syslog messages over TCP, providing a more reliable transmission.
* TCP 1470: This port is often used for secure or alternative syslog transmission.
Usage in FortiSIEM: FortiSIEM can be configured to receive syslog messages on these ports to ensure the logs are collected from various network devices.
References: FortiSIEM 6.3 User Guide, Syslog Integration section, which details the supported ports for syslog transmission.
NEW QUESTION # 15
A customer is experiencing slow performance while executing long, adhoc analytic searches Which FortiSIEM component can make the searches run faster?
- A. Correlation worker
- B. Event worker
- C. Query worker
- D. Storage worker
Answer: C
Explanation:
Component Roles in FortiSIEM: Different components in FortiSIEM have specific roles and responsibilities, which contribute to the overall performance and functionality of the system.
Query Worker: The query worker component is specifically designed to handle and optimize search queries within FortiSIEM.
* Function: It processes search requests and executes analytic searches efficiently, handling large volumes of data to provide quick results.
* Optimization: By improving the efficiency of query execution, the query worker can significantly speed up long, ad hoc analytic searches, addressing performance issues.
Performance Impact: Utilizing the query worker ensures that searches are handled by a component optimized for such tasks, reducing the load on other components and improving overall system performance.
References: FortiSIEM 6.3 User Guide, System Components section, which describes the roles of different workers, including the query worker, and their impact on system performance.
NEW QUESTION # 16
Which FortiSIEM components can do performance availability and performance monitoring?
- A. Supervisor only
- B. Collectors only
- C. Supervisor, worker, and collector
- D. Supervisor and workers only
Answer: C
Explanation:
Performance and Availability Monitoring: Various components in FortiSIEM are responsible for monitoring the performance and availability of devices and services.
Components:
* Supervisor: Oversees the entire FortiSIEM infrastructure and coordinates the activities of other components.
* Worker: Processes and analyzes the collected data, including performance and availability metrics.
* Collector: Gathers performance and availability data from devices in the network.
Collaborative Functioning: These components work together to ensure comprehensive monitoring of the network's performance and availability.
References: FortiSIEM 6.3 User Guide, Performance and Availability Monitoring section, which explains the roles of the supervisor, worker, and collector in monitoring tasks.
NEW QUESTION # 17
An administrator is using SNMP and WMI credentials to discover a Windows device. How will the WMI method handle this?
- A. WMI method will collect only traffic and IIS logs.
- B. WMI method will collect only DHCP logs.
- C. WMI method will collect only DNS logs.
- D. WMI method will collect security, application, and system events logs.
Answer: D
Explanation:
WMI Method: Windows Management Instrumentation (WMI) is a set of specifications from Microsoft for consolidating the management of devices and applications in a network.
Log Collection: WMI is used to collect various types of logs from Windows devices.
* Security Logs: Contains records of security-related events such as login attempts and resource access.
* Application Logs: Contains logs generated by applications running on the system.
* System Logs: Contains logs related to the operating system and its components.
Comprehensive Data Collection: By using WMI, FortiSIEM can gather a wide range of event logs that are crucial for monitoring and analyzing the security and performance of Windows devices.
References: FortiSIEM 6.3 User Guide, Data Collection Methods section, which details the use of WMI for collecting event logs from Windows devices.
NEW QUESTION # 18
How isa subparttern for a rule defined?
- A. Filters Threshold Time Window definitions
- B. Filters Group By definitions. Threshold
- C. FiltersAggregation Time Window definitions
- D. Filters Aggregation. Group By definition
Answer: C
Explanation:
Rule Subpattern Definition: In FortiSIEM, a subpattern within a rule is used to define specific conditions and criteria that must be met for the rule to trigger an incident or alert.
Components of a Subpattern: The subpattern includes the following elements:
* Filters: Criteria to filter the events that the rule will evaluate.
* Aggregation: Conditions that define how events should be aggregated or grouped for analysis.
* Time Window Definitions: Specifies the time frame over which the events will be evaluated to determine if the rule conditions are met.
Explanation: Together, these components allow the system to efficiently and accurately detect patterns of interest within the event data.
References: FortiSIEM 6.3 User Guide, Rules and Patterns section, which explains the structure and configuration of rule subpatterns, including the use of filters, aggregation, and time window definitions.
NEW QUESTION # 19
Device discovery information is stored in which database?
- A. Profile DB
- B. Event DB
- C. SVN DB
- D. CMDB
Answer: D
Explanation:
Device Discovery Information: Information about discovered devices, including their configurations and statuses, is stored in a specific database.
CMDB: The Configuration Management Database (CMDB) is used to store detailed information about the devices discovered by FortiSIEM.
* Function: It maintains comprehensive details about device configurations, relationships, and other metadata essential for managing the IT infrastructure.
Significance: Storing discovery information in the CMDB ensures that the FortiSIEM system has a centralized repository of device information, facilitating efficient management and monitoring.
References: FortiSIEM 6.3 User Guide, Configuration Management Database (CMDB) section, which details the storage and usage of device discovery information.
NEW QUESTION # 20
If events are grouped by Reporting IP, Event Type, and user attributes in FortiSIEM, how ,many results will be displayed?
- A. Five results will be displayed.
- B. There results will be displayed.
- C. Unique attribute cannot be grouped.
- D. Seven results will be displayed.
Answer: A
NEW QUESTION # 21
Refer to the exhibit.
An administrator is investigating a FortiSIEM license issue.
The procedure is for which offline licensing condition?
- A. The procedure is for offline license verification.
- B. The procedure is for offline license registration.
- C. The procedure is for offline license validation.
- D. The procedure is for offline license debug.
Answer: B
Explanation:
Offline Licensing in FortiSIEM: FortiSIEM provides mechanisms for offline licensing to accommodate environments without direct internet access.
License Tool Command: The command./phLicenseTool --collect license_req.datis used to collect license information necessary for offline registration.
Procedure Analysis: The exhibit shows the output of this command, which indicates the collection of license information to a file namedlicense_req.dat.
Offline License Registration: This collected data file is then typically uploaded to the FortiSIEM support portal or provided to the FortiSIEM support team for processing and generating a license file.
References: FortiSIEM 6.3 Administration Guide, Licensing section, details the procedures for both online and offline license registration, including the use of thephLicenseToolfor offline scenarios.
NEW QUESTION # 22
The FortiSIEM administrator is examining events for two devices to investigate an issue However, the administrator is not getting any results from their search.
Based on the selected fillers shown in the exhibit, why is the search returning no results?
- A. The wrong boolean operator is selected in the Next column
- B. The wrong option is selected in the Operator column
- C. Parenthesis are missing
- D. An invalid IP subnet is typed in the Value column
Answer: A
NEW QUESTION # 23
Refer to the exhibit.
Which value will FortiSIEM use to populate the Event Type field?
- A. diskUtil
- B. phPerfJob
- C. PHL_INFO
- D. PH_DSV_MON_SYS_DISK_UTIL
Answer: C
Explanation:
Event Type Population: In FortiSIEM, the Event Type field is populated based on specific identifiers within the raw message or event log.
Raw Message Analysis: The exhibit shows a raw message with various components, includingPH_DEV_MON_SYS_DISK_UTIL,PHL_INFO,phPerfJob, anddiskUtil.
Primary Event Identifier: ThePH_DEV_MON_SYS_DISK_UTILat the beginning of the raw message is the primary identifier for the event type. It categorizes the type of event, in this case, a system disk utilization monitoring event.
Event Type Field: FortiSIEM uses this primary identifier to populate the Event Type field, providing a clear categorization of the event.
References: FortiSIEM 6.3 User Guide, Event Processing and Event Types section, details how event types are identified and populated in the system.
NEW QUESTION # 24
Which protocol is almost always required for the FortiSIEM GUI discovery process?
- A. Syslog
- B. WMI
- C. Telnet
- D. SNMP
Answer: D
NEW QUESTION # 25
Which item is required to register a FortiSIEM appliance license?
- A. Static storage
- B. Static MAC address
- C. Static IP address
- D. Static Hardware ID
Answer: D
NEW QUESTION # 26
IF the reported packet loss is between 50% and 98%. which status is assigned to the device in the Availability column of summary dashboard?
- A. Degraded status is assigned because of packet loss
- B. Up status is assigned because of received packets.
- C. Critical status is assigned because of reduction in number of packets received.
- D. Down status is assigned because of packet loss.
Answer: C
Explanation:
Device Status in FortiSIEM: FortiSIEM assigns different statuses to devices based on their operational state and performance metrics.
Packet Loss Impact: The reported packet loss percentage directly influences the status assigned to a device.
Packet loss between 50% and 98% indicates significant network issues that affect the device's performance.
Degraded Status: When packet loss is between 50% and 98%, FortiSIEM assigns a "Degraded" status to the device. This status indicates that the device is experiencing substantial packet loss, which impairs its performance but does not render it completely non-functional.
Reasoning: The "Degraded" status helps administrators identify devices with serious performance issues that need attention but are not entirely down.
References: FortiSIEM 6.3 User Guide, Device Availability and Status section, explains the criteria for assigning different statuses based on performance metrics such as packet loss.
NEW QUESTION # 27
Refer to the exhibit.
How was the FortiGate device discovered by FortiSIEM?
- A. GUI log discovery
- B. Syslog discovery
- C. Auto log discovery
- D. Pull events discovery
Answer: B
Explanation:
Discovery Methods in FortiSIEM: FortiSIEM can discover devices using various methods, including syslog, SNMP, and others.
Syslog Discovery: The exhibit shows that the FortiGate device is discovered by FortiSIEM using syslog.
* Syslog Parsing: The syslog messages sent by the FortiGate device are parsed by FortiSIEM to extract relevant information.
* CMDB Entry: Based on the parsed information, an entry is populated in the Configuration Management Database (CMDB) for the device.
Evidence in Exhibit: The exhibit shows the syslog flow from the FortiGate Firewall to the parsing and discovery process, resulting in the device being listed in the CMDB with the status "Pending." References: FortiSIEM 6.3 User Guide, Device Discovery section, which explains how syslog discovery works and how devices are added to the CMDB based on syslog data.
NEW QUESTION # 28
A FortiSIEM administrator wants to collect both SIEM event logs and performance and availability metrics (PAM) events from a Microsoft Windows server
Which protocol should the administrator select in the AccessProtocoI drop-down list so that FortiSIEM will collect both SIEM and PAM events?
- A. LDAPS
- B. WMI
- C. LDAP start TLS
- D. TELNET
Answer: B
NEW QUESTION # 29
Which statement about global thresholds and per device thresholds is true?
- A. FortiSIEM uses global and per device thresholds tor all performance metrics.
- B. FortiSIEM uses fixed hardcoded thresholds for all performance metrics.
- C. FortiSIEM uses global thresholds for all security metrics.
- D. FortiSIEM uses global thresholds for all performance metrics.
Answer: A
Explanation:
Threshold Management: FortiSIEM uses thresholds to generate alerts and incidents based on performance and security metrics.
Global Thresholds: These are default thresholds applied to all devices and metrics across the system, providing a baseline for alerts.
Per Device Thresholds: These thresholds can be customized for individual devices, allowing for more granular control and tailored monitoring based on specific device characteristics and requirements.
Usage in Performance Metrics: Both global and per device thresholds are used for performance metrics to ensure comprehensive and precise monitoring.
References: FortiSIEM 6.3 User Guide, Thresholds and Alerts section, details the application of global and per device thresholds for performance and security metrics.
NEW QUESTION # 30
What are the four possible incident status values?
- A. Active, closed, manual, resolved
- B. Active, cleared, cleared manually, system cleared
- C. Active, dosed, cleared, open
- D. Active, auto cleared, manual, false positive
Answer: B
NEW QUESTION # 31
Which is a requirement for implementing FortiSIEM disaster recovery?
- A. SNMP, and WMI ports must be open between the two supervisor nodes.
- B. The two supervisor nodes must have layer 2 connectivity.
- C. All worker nodes must access both supervisor nodes using IP.
- D. DNS names must be used for the worker upload addresses.
Answer: D
Explanation:
Disaster Recovery (DR) Implementation: For FortiSIEM to effectively support disaster recovery, specific requirements must be met to ensure seamless failover and data integrity.
Layer 2 Connectivity: One of the critical requirements for implementing FortiSIEM DR is that the two supervisor nodes must have layer 2 connectivity.
* Layer 2 Connectivity: This ensures that the supervisors can communicate directly at the data link layer, which is necessary for synchronous data replication and other DR processes.
Importance of Connectivity: Layer 2 connectivity between the supervisor nodes ensures that they can maintain consistent and up-to-date state information, which is essential for a smooth failover in the event of a disaster.
References: FortiSIEM 6.3 Administration Guide, Disaster Recovery section, which details the requirements and configurations needed for setting up disaster recovery, including the necessity for layer 2 connectivity between supervisor nodes.
NEW QUESTION # 32
To determine whether or not syslog is being received from a network device, which is the best command from the backend?
- A. phSyslogRecorder
- B. netcat
- C. phDeviceTest
- D. tcpdump
Answer: D
NEW QUESTION # 33
Which is a requirement for implementing FortiSIEM disaster recovery?
- A. DNS names must be used for the worker upload addresses.
- B. SNMP, and WMI ports must be open between the two supervisor nodes.
- C. The two supervisor nodes must have layer 2 connectivity.
- D. All worker nodes must access both supervisor nodes using IP.
Answer: C
Explanation:
Disaster Recovery (DR) Implementation: For FortiSIEM to effectively support disaster recovery, specific requirements must be met to ensure seamless failover and data integrity.
Layer 2 Connectivity: One of the critical requirements for implementing FortiSIEM DR is that the two supervisor nodes must have layer 2 connectivity.
* Layer 2 Connectivity: This ensures that the supervisors can communicate directly at the data link layer, which is necessary for synchronous data replication and other DR processes.
Importance of Connectivity: Layer 2 connectivity between the supervisor nodes ensures that they can maintain consistent and up-to-date state information, which is essential for a smooth failover in the event of a disaster.
References: FortiSIEM 6.3 Administration Guide, Disaster Recovery section, which details the requirements and configurations needed for setting up disaster recovery, including the necessity for layer 2 connectivity between supervisor nodes.
NEW QUESTION # 34
In the advanced analytical rules engine in FortiSIEM, multiple subpatterms can be referenced using which three operation?(Choose three.)
- A. FOLLOWED_BY
- B. NOT
- C. OR
- D. AND
- E. ELSE
Answer: A,C,D
Explanation:
Advanced Analytical Rules Engine: FortiSIEM's rules engine allows for complex event correlation using multiple subpatterns.
Operations for Referencing Subpatterns:
* FOLLOWED_BY: This operation is used to indicate that one event follows another within a specified time window.
* OR: This logical operation allows for the inclusion of multiple subpatterns, where the rule triggers if any of the subpatterns match.
* AND: This logical operation requires all referenced subpatterns to match for the rule to trigger.
Usage: These operations allow for detailed and precise event correlation, helping to detect complex patterns and incidents.
References: FortiSIEM 6.3 User Guide, Advanced Analytics Rules Engine section, which explains the use of different operations to reference subpatterns in rules.
NEW QUESTION # 35
......
A fully updated 2024 NSE5_FSM-6.3 Exam Dumps exam guide from training expert DumpsQuestion: https://www.dumpsquestion.com/NSE5_FSM-6.3-exam-dumps-collection.html
Practice To NSE5_FSM-6.3 - DumpsQuestion Remarkable Practice On your Fortinet NSE 5 - FortiSIEM 6.3 Exam: https://drive.google.com/open?id=1QgPwMu1RhOXv41wDFd3HU9we23ixvUsi