Oct 29, 2022 Newest 300-715 Exam Dumps – Achieve Success in Actual 300-715 Exam
Updated Cisco 300-715 Dumps – Check Free 300-715 Exam Dumps (2022)
Understanding functional and technical aspects of Implementing and Configuring Cisco Identity Services Engine (300-715 SISE) Architecture and deployment
The following will be discussed in CISCO 300-715 exam dumps:
- Describe BYOD challenges, solutions, processes, and portals. Configure a BYOD solution, and describe the relationship between BYOD processes and their related configuration components. Describe and configure various certificates related to a BYOD solution.
- Describe deployment options
- Configure personas
- Describe how Cisco ISE policy sets are used to implement authentication and authorization, and how to leverage this capability to meet the needs of your organization.
- Describe and configure TACACS+ device administration using Cisco ISE, including command sets, profiles, and policy sets. Understand the role of TACACS+ within the Authentication, Authentication, and Accounting (AAA) framework and the differences between the RADIUS and TACACS+ protocols.
- Describe and configure Cisco ISE profiling services, and understand how to monitor these services to enhance your situational awareness about network-connected endpoints. Describe best practices for deploying this profiler service in your specific environment.
- Describe endpoint compliance, compliance components, posture agents, posture deployment and licensing, and the posture service in Cisco ISE.
- Describe the value of the My Devices portal and how to configure this portal.
Understanding functional and technical aspects of Implementing and Configuring Cisco Identity Services Engine (300-715 SISE) Policy enforcement
The following will be discussed in CISCO 300-715 exam dumps:
- Cisco ISE Use Cases
- Configure wired/wireless 802.1X network access
- Local
- Configuring Sponsor and Guest Portals
- Describing Cisco ISE Functions
- Easy Connect
- Introducing Cisco TrustSec
- Configuring Certificate Services
- Using 802.1X for Wired and Wireless Access
- OTP
- Introducing Cisco ISE Policy
- Using MAC Authentication Bypass for Wired and Wireless Access
- Context Visibility
- LDAP
- Introducing Guest Access Components
- Introducing Cisco ISE Architecture and Deployment
- Cisco TrustSec Configuration
- Cisco ISE Deployment Models
- Introducing Web Access with Cisco ISE
- Introducing Identity Management
- Using Cisco ISE as a Network Access Policy Engine
- Describe identity store options
- PKI
- Implementing Third-Party Network Access Device Support
NEW QUESTION 14
Which statement is not correct about the Cisco ISE Monitoring node?
- A. The local collector agent collects logs locally from itself and from any NAD that is configured to send logs to the Policy Service node.
- B. The local collector agent process runs only the Inline Posture node.
- C. Cisco ISE supports distributed log collection across all nodes to optimize local data collection, aggregation, and centralized correlation and storage.
- D. The local collector buffers transport the collected data to designated Cisco ISE Monitoring nodes as syslog; once Monitoring nodes are globally defined via Administration, ISE nodes automatically send logs to one or both of the configured Monitoring nodes.
Answer: B
NEW QUESTION 15
When creating a policy within Cisco ISE for network access control, the administrator wants to allow different access restrictions based upon the wireless SSID to which the device is connecting. Which policy condition must be used in order to accomplish this?
- A. DEVICE Device Type CONTAINS <SSID Name>
- B. Network Access NetworkDeviceName CONTAINS <SSID Name>
- C. Airespace Airespace-Wlan-ld CONTAINS <SSID Name>
- D. Radius Called-Station-ID CONTAINS <SSID Name>
Answer: D
Explanation:
Explanation
https://www.cisco.com/c/en/us/support/docs/security/identity-services-engine/115734-ise-policies-ssid-00.ht
NEW QUESTION 16
An engineer is configuring Cisco ISE and needs to dynamically identify the network endpoints and ensure that endpoint access is protected.
Which service should be used to accomplish this task?
- A. profiling
- B. client provisioning
- C. posture
- D. guest access
Answer: A
Explanation:
Section: Profiler
Explanation
NEW QUESTION 17
Which port does Cisco ISE use for native supplicant provisioning of a Windows laptop?
- A. TCP 8905
- B. UDP 1812
- C. TCP 8909
- D. TCP 443
Answer: C
Explanation:
Section: Endpoint Compliance
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/security/ise/2-1/admin_guide/b_ise_admin_guide_21/ b_ise_admin_guide_20_chapter_010101.html
NEW QUESTION 18
Which two endpoint compliance statuses are possible? (Choose two.)
- A. valid
- B. compliant
- C. unknown
- D. invalid
- E. known
Answer: B,C
NEW QUESTION 19
Which interface-level command is needed to turn on 802 1X authentication?
- A. dot1x system-auth-control
- B. Dofl1x pae authenticator
- C. authentication host-mode single-host
- D. aaa server radius dynamic-author
Answer: B
NEW QUESTION 20
Which advanced option within a WLAN must be enabled to trigger Central Web Authentication for Wireless users on AireOS controller?
- A. AAA override
- B. static IP tunneling
- C. override Interface ACL
- D. DHCP server
Answer: A
Explanation:
Section: Web Auth and Guest Services
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-4/configuration/guides/consolidated/ b_cg74_CONSOLIDATED/b_cg74_CONSOLIDATED_chapter_010110111.html
NEW QUESTION 21
An organization wants to split their Cisco ISE deployment to separate the device administration functionalities from the mam deployment. For this to work, the administrator must deregister any nodes that will become a part of the new deployment, but the button for this option is grayed out Which configuration is causing this behavior?
- A. One of the nodes is an active PSN.
- B. All of the nodes participate in the PAN auto failover.
- C. One of the nodes is the Primary PAN
- D. All of the nodes are actively being synched.
Answer: C
Explanation:
https://www.cisco.com/c/en/us/td/docs/security/ise/2-7/admin_guide/b_ise_27_admin_guide/b_ISE_admin_27_deployment.html#ID185
NEW QUESTION 22
An engineer is implementing Cisco ISE and needs to configure 802.1X. The port settings are configured for port-based authentication. Which command should be used to complete this configuration?
- A. authentication port-control auto
- B. aaa authentication dot1x default group radius
- C. dot1x system-auth-control
- D. dot1x pae authenticator
Answer: C
NEW QUESTION 23
An engineer is configuring 802.1X and wants it to be transparent from the users' point of view. The implementation should provide open authentication on the switch ports while providing strong levels of security for non-authenticated devices. Which deployment mode should be used to achieve this?
- A. high-impact
- B. closed
- C. open
- D. low-impact
Answer: D
Explanation:
Explanation
https://www.lookingpoint.com/blog/cisco-ise-wired-802.1x-deployment-monitormode#:~:text=Low%20imp
NEW QUESTION 24
An engineer is configuring web authentication and needs to allow specific protocols to permit DNS traffic.
Which type of access list should be used for this configuration?
- A. standard ACL
- B. numbered ACL
- C. extended ACL
- D. reflexive ACL
Answer: C
NEW QUESTION 25
An administrator is manually adding a device to a Cisco ISE identity group to ensure that it is able to access the network when needed without authentication Upon testing, the administrator notices that the device never hits the correct authorization policy line using the condition EndPoints LogicalProfile EQUALS static_list Why is this occurring?
- A. The identity group is being assigned instead of the logical profile
- B. The logical profile is being statically assigned instead of the identity group
- C. The device is changing identity groups after profiling instead ot remaining static
- D. The dynamic logical profile is overriding the statically assigned profile
Answer: B
NEW QUESTION 26
An engineer is configuring a virtual Cisco ISE deployment and needs each persona to be on a different node.
Which persona should be configured with the largest amount of storage in this environment?
- A. Primary Administration
- B. Monitoring and Troubleshooting
- C. policy Services
- D. Platform Exchange Grid
Answer: B
NEW QUESTION 27
Which supplicant(s) and server(s) are capable of supporting EAP-CHAINING?
- A. Cisco AnyConnect NAM and Cisco Access Control Server
- B. Cisco Secure Services Client and Cisco Access Control Server
- C. Cisco AnyConnect NAM and Cisco Identity Service Engine
- D. Windows Native Supplicant and Cisco Identity Service Engine
Answer: C
Explanation:
Section: Architecture and Deployment
Explanation/Reference: https://www.cisco.com/c/en/us/support/docs/wireless-mobility/eap-fast/200322-Understanding- EAP-FAST-and-Chaining-imp.html
NEW QUESTION 28
Drag the Cisco ISE node types from the left onto the appropriate purposes on the right.
Answer:
Explanation:
Explanation
Monitoring = provides advanced monitoring and troubleshooting tools that you can use to effectively manage your network and resources Policy Service = provides network access, posture, guest access, client provisioning, and profiling services.
This persona evaluates the policies and makes all the decisions.
Administration = manages all system-related configuration and configurations that relate to functionality such as authentication, authorization, auditing, and so on pxGrid = shares context-sensitive information from Cisco ISE to subscribers
https://www.cisco.com/c/en/us/td/docs/security/ise/1-4/admin_guide/b_ise_admin_guide_14/b_ise_admin_guide
NEW QUESTION 29
Drag the steps to configure a Cisco ISE node as a primary administration node from the left into the correct order on the night.
Answer:
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/security/ise/2-4/admin_guide/b_ise_admin_guide_24/b_ise_admin_guide Step 1 Choose Administration > System > Deployment.
The Register button will be disabled initially. To enable this button, you must configure a Primary PAN.
Step 2
Check the check box next to the current node, and click Edit.
Step 3
Click Make Primary to configure your Primary PAN.
Step 4
Enter data on the General Settings
Step 5
Click Save to save the node configuration.
NEW QUESTION 30
What is the purpose of the ip http server command on a switch?
- A. It enables the https server for users for web authentication
- B. It enables MAB authentication on the switch
- C. It enables the switch to redirect users for web authentication.
- D. It enables dot1x authentication on the switch.
Answer: C
NEW QUESTION 31
When configuring an authorization policy, an administrator cannot see specific Active Directory groups present in their domain to be used as a policy condition. However, other groups that are in the same domain are seen What is causing this issue?
- A. Cisco ISE's connection to the AD join point is failing
- B. The groups are not added to Cisco ISE under the AD join point
- C. The groups are present but need to be manually typed as conditions
- D. Cisco ISE only sees the built-in groups, not user created ones
Answer: B
Explanation:
Explanation
https://www.youtube.com/watch?v=0kuEZEo564s&ab_channel=CiscoISE-IdentityServicesEngine
NEW QUESTION 32
An engineer is working with a distributed deployment of Cisco ISE and needs to configure various network probes to collect a set of attributes from the used to accomplish this task?
- A. pxGrid
- B. primary policy administrator
- C. policy service
- D. monitoring
Answer: D
NEW QUESTION 33
An engineer is implementing Cisco ISE and needs to configure 802.1X. The port settings are configured for port-based authentication. Which command should be used to complete this configuration?
- A. authentication port-control auto
- B. dot1x system-auth-control
- C. aaa authentication dot1x default group radius
- D. dot1x pae authenticator
Answer: C
NEW QUESTION 34
Which two probes must be enabled for the ARP cache to function in the Cisco ISE profile service so that a user can reliably bind the IP address and MAC addresses of endpoints? (Choose two.)
- A. HTTP
- B. RADIUS
- C. SNMP
- D. DHCP
- E. NetFlow
Answer: B,D
Explanation:
Cisco ISE implements an ARP cache in the profiling service, so that you can reliably map the IP addresses and the MAC addresses of endpoints. For the ARP cache to function, you must enable either the DHCP probe or the RADIUS probe. The DHCP and RADIUS probes carry the IP addresses and the MAC addresses of endpoints in the payload data. The dhcp-requested address attribute in the DHCP probe and the Framed-IP-address attribute in the RADIUS probe carry the IP addresses of endpoints, along with their MAC addresses, which can be mapped and stored in the ARP cache.
https://www.cisco.com/c/en/us/td/docs/security/ise/2-1/admin_guide/b_ise_admin_guide_21/b_ise_admin_guide_20_chapter_010100.html
NEW QUESTION 35
A network administrator is configuring a secondary cisco ISE node from the backup configuration of the primary cisco ISE node to create a high availability pair The Cisco ISE CA certificates and keys must be manually backed up from the primary Cisco ISE and copied into the secondary Cisco ISE Which command most be issued for this to work?
- A. application configure Ise
- B. copy certificate Ise
- C. certificate configure Ise
- D. Import certificate Ise
Answer: B
NEW QUESTION 36
Which compliance status is set when a matching posture policy has been defined for that endpomt. but all the mandatory requirements during posture assessment are not met?
- A. unauthorized
- B. non-compliant
- C. untrusted
- D. unknown
Answer: B
NEW QUESTION 37
An engineer builds a five-node distributed Cisco ISE deployment The first two deployed nodes are responsible for the primary and secondary administration and monitoring personas Which persona configuration is necessary to have the remaining three Cisco ISE nodes serve as dedicated nodes in the Cisco ISE cube that is responsible only for handling the RADIUS and TACACS+ authentication requests, identity lookups, and policy evaluation?
A)
B)
C)
D)
- A. Option C
- B. Option D
- C. Option B
- D. Option A
Answer: B
NEW QUESTION 38
What are two requirements of generating a single signing in Cisco ISE by using a certificate provisioning portal, without generating a certificate request? (Choose two )
- A. Select the certificate template
- B. Choose the hashing method
- C. Enter the IP address of the device
- D. Location the CSV file for the device MAC
- E. Enter the common name
Answer: A,E
Explanation:
Explanation
https://www.cisco.com/c/en/us/support/docs/security/identity-services-engine/200534-ISE-2-0-Certificate-Provis
NEW QUESTION 39
......
A valuable & challenging Cisco exam that leads to two different Cisco certifications is test 300-715 SISE or Executing & Configuring Cisco Identity Services Engine.
Actual 300-715 Exam Recently Updated Questions with Free Demo: https://www.dumpsquestion.com/300-715-exam-dumps-collection.html
Valid 300-715 exam with Cisco Real Exam Questions: https://drive.google.com/open?id=14lf0veaGIfCZvHXP2w8lvZAMu0UAby-N