Updated Nov-2021 HPE2-T37 Exam Practice Test Questions
Verified HPE2-T37 dumps Q&As 100% Pass in First Attempt Guaranteed Updated Dump
NEW QUESTION 24
Your customer is considering HPE Synergy as a hardware platform for visualization workload. The customer environment is wry dynamic, and they often have to modify hypervisor networking.
Which resource provided by HPE should you discuss with this customer?
- A. HPE Image Streamer provides templates which can be updated to map the hypervisor requirements
- B. PowerShell Library for HPE OneView allows scripted environment modification.
- C. HPE OneView for VMware vCenter Server will enable host profile functionality and simplify changes.
- D. HPE OneView Global Dashboard allows server profile replication and change management.
Answer: A
NEW QUESTION 25
Refer to the exhibit.
After adding SAN Manager to HPE OneView. you noticed that all SANs are in the discovered state. How will this affect HPE OneView storage management capabilities?
- A. Auto-zoning functionality will not work until SANs are associated with networks.
- B. Volume presentation through server profile will work with the discovered state.
- C. Snapshot functionality will be limited only to the volumes not using these SANs.
- D. Volume provisioning will only work for arrays that ate accessible through these SANs.
Answer: B
NEW QUESTION 26
Which parameters can be defined in a server profile template for HPE Synergy Compute Modules? (Select two.)
- A. partition layout for servers running Linux.
- B. IL0 IPv4 or IPv6 address.
- C. network and storage connectivity.
- D. NIC teaming setup at OS level.
- E. local storage and BIOS settings.
Answer: C,E
NEW QUESTION 27
Which HPE components can be managed using HPE Composer? (select two.)
- A. HPE Synergy Virtual Connect SE 32Gb FC Module
- B. HPE MSA 2062 Storage Array
- C. HPE B-series SN6600B Fibre Channel Switch
- D. HPE Synergy 480 Compute Modules
- E. HPE Superdome Flex 280
Answer: A,C
NEW QUESTION 28
What is required to add remote frame link topology to HPE OneView?
- A. Multi-site licenses must be added to HPE OneView and activate for all available HPE Synergy frames.
- B. The IP address assigned to HPE Composer installed in a remote site must be registered in a primary site.
- C. The HPE OneView certificate from the primary site must be added to HPE OneView in the remote site.
- D. Management ports of the remote frame link topology must be connected to the management LAN.
Answer: A
NEW QUESTION 29
Your customer wants to use HPE OneView for VMware vCenter Server to simplify management of their VMware cluster running on HPE Synergy. The customer is concerned with the cost of additional licenses.
How will you explain licensing rules for this product?
- A. As long as the customer has HPE OneVtew Global Dashboard deployed, HPE OneView for VMware vCenter Server does not require any additional licenses.
- B. One HPE OneView for VMware vCenter Server license is required per HPE Synergy frame if more than
10 Compute Modules are installed in the frame. - C. If the number of the HPE Synergy Compute Modules installed in HPE Synergy frame is less than 10, no license is required to use HPE OneView tor VMware vCenter Server.
- D. As long as the server is managed using HPE OneView. the customer can use HPE OneView for VMware vCenter Server without additional licenses.
Answer: B
NEW QUESTION 30
Refer to the exhibit.
You discovered that one of the profiles is not compliant with the server profile template. What could cause this profile to be inconsistent with the server profile template?
- A. Changes to the server profile were implemented directly on the server profile.
- B. The server was powered off or rebooted recently and IL0 did not reconnect to HPE OneView.
- C. Network connectivity for HPE Synergy Compute Module was changed outside HPE OneView.
- D. HPE OneView was restored from a backup that created ^consistency with the server profile template.
Answer: C
NEW QUESTION 31
Which statement about RoCE network restrictions is true?
- A. RoCE networks cannot be configured when Virtual Connect modules are used.
- B. RoCE networks require Virtual Connect SE 32Gb FC Modules.
- C. RoCE networks are not supported with HPE BladeSystem
- D. RoCE networks are supported only when PVLANs are enabled.
Answer: C
NEW QUESTION 32
Click the option that must be configured for an HPE OneView when an HPE storage system is connected directly to an HPE Synergy frame.
Answer:
Explanation:
NEW QUESTION 33
How can your customer implement HPE OneView so that it can be used to manage an HPE ProLiant server and HPE BladeSystem?
- A. As an application running on the server with Windows system.
- B. As an application running on the server with CentOS Linux system
- C. As a virtual appliance running on the supported hypervisor.
- D. As a physical appliance based on HPE ProLiant 360 Gen 10.
Answer: D
NEW QUESTION 34
Your customer wants to optimize GenlO servers for a virtualization workload by configuring all of them with a specific workload profile in the BIOS. All of the servers are managed using HPE OneView.
How can this task be completed?
- A. Set a specific workload profile for all managed servers as an HPE OneView global setting.
- B. Set a specific workload profile within Logical Interconnect Group and update all servers.
- C. Set a specific workload profile using IL0 interface for each individual server.
- D. Set a specific workload profile within server profile template and update all profiles.
Answer: A
NEW QUESTION 35
Which statement about a server profile for an Apollo system is true?
- A. Virtual WWNs and MAC addresses can be defined
- B. UEFI optimized is the only available boot mode
- C. Fibre Channel connections can be defined
- D. Enclosure Group Is automatically selected
Answer: A
NEW QUESTION 36
Which statement about a Logical Enclosure for HPE BladeSystem is Hue?
- A. A logical enclosure must be created only for monitored HPE BladeSystem C700O enclosures.
- B. A logical enclosure can contain a mix of HPE BladeSystem c7000 and C3000 enclosures.
- C. A logical enclosure is created automatically, and it is always based on a single enclosure.
- D. A logical enclosure can have between 1 to 5 HPE BladeSystem c7000 enclosures.
Answer: C
NEW QUESTION 37
You want to update the firmware for only two HPE Synergy Virtual Connect SE 32Gb FC Modules of a large environment. From which level must this procedure be initiated?
- A. Logical Interconnect
- B. Logical Enclosure
- C. Server Profile
- D. Logical Interconnect Group
Answer: B
NEW QUESTION 38
What is a network set?
- A. It is a collection of all internal networks defined for a specific type of traffic like vSAN or vMotion.
- B. It is a collection of all networks configured within HPE OneView regardless of network type.
- C. It is a collection of untagged Ethernet networks that form a named group to simplify server profile creation.
- D. It is a collection of tagged Ethernet networks that form a named group to simplify server profile creation.
Answer: D
NEW QUESTION 39
Refer to the exhibit.
A customer complains that firmware compliance is empty. The customer confirmed that Synergy Service Pack is uploaded to the HPE OneView repository. How should you respond?
- A. The firmware repository service must be restarted using maintenance connection.
- B. The refresh procedure must be performed on each logical enclosure to refresh firmware.
- C. The firmware repository is not defined within firmware compliance report.
- D. All of the components are up to date and compliant with firmware baseline.
Answer: A
NEW QUESTION 40
......
Ultimate Guide to Prepare Free HPE2-T37 Exam Questions & Answer: https://drive.google.com/open?id=1rQO6V5WaOw6SjgX4KH7WOlF7wVZ12JBM
Pass HPE Product Certified - OneView [2022] HPE2-T37 Exam With 41 Questions: https://www.dumpsquestion.com/HPE2-T37-exam-dumps-collection.html